[zb4osgi-changeset] [scm] ZigBee 4 OSGi repository change: r599 - in /projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL: ./ curl/ libupnp/ linuxgal/ patches/ patches/curl/ patches/iniparser/ patches/iniparser/src/ patches/libupnp/ patches/tinyxml/ zigbee/
scm-notify at zb4osgi.aaloa.org
scm-notify at zb4osgi.aaloa.org
Wed Jan 16 11:47:54 CET 2013
Author: andrea.ranalli
Date: Wed Jan 16 11:47:54 2013
New Revision: 599
Log:
Reviewd the whole environment and simplified the setup of the whole project
Added:
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/Makefile.in
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/aclocal.m4
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/config.h.in
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure (with props)
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/depcomp (with props)
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/install-sh (with props)
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/missing (with props)
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/curl/
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/curl/Makefile.cross
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/Makefile
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/Makefile.cross
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/dictionary.h
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/iniparser.h
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/libupnp/
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/libupnp/Makefile.cross
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/Makefile
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/Makefile.cross
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/tinyxml.h
Removed:
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/curl/
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/libupnp/
Modified:
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/Makefile
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/README
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/Makefile.cross
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure.ac
projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/zigbee/Makefile.cross
Modified: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/Makefile
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/Makefile (original)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/Makefile Wed Jan 16 11:47:54 2013
@@ -1,4 +1,6 @@
include Makefile.rules
+
+DOWNLOAD_DIR = ExternalPackages
SUBDIRS = libupnp
SUBDIRS += iniparser
@@ -33,7 +35,6 @@
exit 1 ; \
fi \
else \
- echo 2222 ;\
if [ -f $$subdir/configure ] ; then \
(cd $$subdir && [ -f Makefile ] && ./configure --prefix=$(PREFIX) --host=$(HOSTARCH) --build=$(BUILDARCH) ) \
fi ;\
@@ -90,9 +91,7 @@
list='$(SUBDIRS_ALL)'; \
for subdir in $$list; do \
if [ -f $$subdir/Makefile.cross ] ; then \
- if [ -f $$subdir/configure ] ; then \
- (cd $$subdir && $(MAKE) -f Makefile.cross $@) \
- fi \
+ (cd $$subdir && $(MAKE) -f Makefile.cross $@) \
else \
if [ -f $$subdir/Makefile ] ; then \
if [ -f $$subdir/configure ] ; then \
@@ -105,3 +104,54 @@
ctags:
ctags-exuberant --recurse .
+
+.PHONY: downloads
+
+download: \
+ $(DOWNLOAD_DIR)/libupnp-1.6.15.tar.bz2 \
+ $(DOWNLOAD_DIR)/curl-7.27.0.tar.gz \
+ $(DOWNLOAD_DIR)/tinyxml_2_5_3.tar.gz \
+ $(DOWNLOAD_DIR)/iniparser.zip
+
+$(DOWNLOAD_DIR)/libupnp-1.6.15.tar.bz2:
+ mkdir -p $(DOWNLOAD_DIR)
+ cd $(DOWNLOAD_DIR) && wget http://sourceforge.net/projects/pupnp/files/pupnp/libUPnP%201.6.15/libupnp-1.6.15.tar.bz2
+
+$(DOWNLOAD_DIR)/curl-7.27.0.tar.gz:
+ mkdir -p $(DOWNLOAD_DIR)
+ cd $(DOWNLOAD_DIR) && wget http://curl.haxx.se/download/curl-7.27.0.tar.gz
+
+$(DOWNLOAD_DIR)/tinyxml_2_5_3.tar.gz:
+ mkdir -p $(DOWNLOAD_DIR)
+ cd $(DOWNLOAD_DIR) && wget http://sourceforge.net/projects/tinyxml/files/tinyxml/2.5.3/tinyxml_2_5_3.tar.gz
+
+$(DOWNLOAD_DIR)/iniparser.zip:
+ mkdir -p $(DOWNLOAD_DIR)
+ cd $(DOWNLOAD_DIR) && wget --no-check-certificate -O iniparser.zip https://github.com/andrearanalli/iniparser/archive/master.zip
+
+extract: libupnp curl tinyxml iniparser
+
+libupnp: $(DOWNLOAD_DIR)/libupnp-1.6.15.tar.bz2
+ tar jxvf $(DOWNLOAD_DIR)/libupnp-1.6.15.tar.bz2 && mv libupnp-* libupnp
+
+curl: $(DOWNLOAD_DIR)/curl-7.27.0.tar.gz
+ tar zxvf $(DOWNLOAD_DIR)/curl*.tar.gz && mv curl-* curl
+
+tinyxml: $(DOWNLOAD_DIR)/tinyxml_2_5_3.tar.gz
+ tar zxvf $(DOWNLOAD_DIR)/tinyxml_2_5_3.tar.gz
+
+iniparser: $(DOWNLOAD_DIR)/iniparser.zip
+ unzip $(DOWNLOAD_DIR)/iniparser.zip && mv iniparser-* iniparser
+
+
+init: libupnp curl tinyxml iniparser patch_sources
+
+cleanall:
+ rm -rf curl iniparser tinyxml libupnp rm -rf $(DOWNLOAD_DIR)
+
+patch_sources:
+ cp patches/curl/*.* curl
+ rm -rf curl/Makefile
+ cp patches/tinyxml/* tinyxml/
+ cp -r patches/iniparser/* iniparser/
+ cp patches/libupnp/*.* libupnp/
Modified: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/README
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/README (original)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/README Wed Jan 16 11:47:54 2013
@@ -1,3 +1,4 @@
+<<<<<<< .mine
Gateway Abstraction Layer (GAL) - A standard ZigBee Gateway Device implementation
Copyright 2008-2013 TELECOM ITALIA S.p.A. - http://www.telecomitalia.it
Part of this computer programs(s) may be used, reproduced, stored in any retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, under the Apache License 2.0 with the implicit approval of TELECOM ITALIA.
@@ -12,7 +13,7 @@
- libupnp (current release 1.6.15). This product uses software downloaded at Sourceforge (http://sourceforge.net/projects/pupnp/files/pupnp/libUPnP%201.6.15/libupnp-1.6.15.tar.bz2/download ) licensed under the BSD License.
- curl (current release 7.27.0). This product uses software developed Sourceforge (http://curl.haxx.se/download/curl-7.27.0.tar.gz) licensed under the MIT License.
- tinyxml (release 2.5.3). This product uses software developed at Sourceforge (http://sourceforge.net/projects/tinyxml/files/tinyxml/2.5.3/tinyxml_2_5_3.tar.gz/download )licensed under the zlib/libpng License.
-- iniparser (release 3.1). This product uses software developed and licensed under the MIT License, freely downloadable at http://ndevilla.free.fr/iniparser/iniparser-3.1.tar.gz
+- iniparser (release 3.1). This product uses software developed and licensed under the MIT License, freely downloadable at https://github.com/andrearanalli/iniparser/archive/master.zip
Also, part of this software is based on the specification provided by the ZigBee Alliance (http://www.zigbee.org), licensed under ZigBee specific license for non-member of the ZigBee Alliance.
@@ -20,7 +21,7 @@
- Apache License 2.0
- ZigBee Non-Member License
-Note: shttpd (release 1.42) is a software downloaded on 2008 from http://sourceforge.net/projects/shttpd/files/shttpd/1.42/shttpd-1.42.tar.gz/download and later on modified by Telecom Italia. The project has been ported to a new project called mongoose (current release 3.1), licensed under the MIT License (but not used by GAL at the moment). The owner of the original project, Sergey Lyubka, has copyrighted the code with "THE BEER-WARE LICENSE" (Revision 42): "Sergey Lyubka wrote this file. As long as you retain this notice you can do whatever you want with this stuff. If we meet some day, and you think this stuff is worth it, you can buy me a beer in return". based on this, the shttpd project modified by Telecom Italia can be distributed together with the GAL's source code.
+Note: shttpd (release 1.42) is a software downloaded on 2008 from http://sourceforge.net/projects/shttpd/files/shttpd/1.42/shttpd-1.42.tar.gz/download and later on modified by Telecom Italia. The project has been ported to a new project called mongoose (current release 3.1), licensed under the MIT License (but not used by GAL at the moment). The owner of the original project, Sergey Lyubka, has copyrighted the code with "THE BEER-WARE LICENSE" (Revision 42): "Sergey Lyubka wrote this file. As long as you retain this notice you can do whatever you want with this stuff. If we meet some day, and you think this stuff is worth it, you can buy me a beer in return". Based on this, the shttpd project modified by Telecom Italia can be distributed together with the GAL's source code.
*****************************
***** II - References *******
@@ -33,52 +34,30 @@
*** III - Installation ******
*****************************
-This short guide will describes how to configure the environment in order to use the GAL using a cygwin environment. However, any other Unix-based system can be used (clearly some steps shall be skipped or slightly edited to fit the target operating system).
-
------ Downloading phase -----
-
-1) Please download the latest version of cygwin from www.cygwin.com, the install it by including all the following packages (please note that the releases are based on Cygwin DLL 1.7.7-1, but more update versions could be available):
+This short guide will describes how to configure the environment in order to use the GAL using a Unix environment.
+
+1) In case you're using a Windows O.S. using Cygwin (www.cygwin.com), please download all the following packages (please note that the releases are based on Cygwin DLL 1.7.7-1, but more update versions could be available):
automake wrapper (4-10) and 1.11.1-1
autoconf wrapper (10-1) and 2.68-1
gcc-g++ 3.4.4-999
openssl-devel 0.8.8r-1
libcurl-dlevel 7.19.6-1
+wget
+unzip
[all their dependencies]
Note: “libcurl-dlevel 7.19.6-1” could be avoid to be installed if we decide to configure and use the local folder 'curl' (it is recommented to use the local folder for linux O.S.)
2) Download the latest release of GAL from the repository (https://svn.aaloa.org/projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL is the currently path available but this could be changed in the future) and copy the whole folder into cygwin's user home folder (or wherever you like).
-3) Download the open source software developed by 3rd parties companies:
-- libupnp-1.6.15 - http://sourceforge.net/projects/pupnp/files/pupnp/libUPnP%201.6.15/libupnp-1.6.15.tar.bz2/download
-- curl-7.27.0 - http://curl.haxx.se/download/curl-7.27.0.tar.gz
-- tinyxml-2.5.3 - http://sourceforge.net/projects/tinyxml/files/tinyxml/2.5.3/tinyxml_2_5_3.tar.gz/download
-- iniparser-3.1 - https://github.com/ndevilla/iniparser/archive/master.zip
-
-4) Unpack each of the above files and put them into GAL's subfolders, according to their name. Please be aware to maintain the Makefile.cross file present in each of those subfolders. For the tinyxml folder, please substitute also the makefile file. Finally, just for the iniparser, be aware that the files dictionary.h and iniparser.h has been changed to support the cross compilation for the C++ environment. In particular, the following lines has been added at the beginning and at the end of each file:
-
- #ifdef __cplusplus
- extern "C" {
- #endif
-
- #ifdef __cplusplus
- }
- #endif
-
------ Automatic installation -----
-
-If you're lucky enough and if all the files have been properly downloaded and put in the right folders, starting from the gal root directory and typing the following commands should be enough:
+3) Type the following commands from the GAL's root folder:
. setup.bash
gal_cygwin //here "gal_something" could be typed, depending on your O.S. (please verify it inside the setup.bash file)
-cd linuxgal
-make -f Makefile.cross genmake
-cd ..
+make init
make all
-(make distclean)
-(make all)
-
-The output generated by the previous commands is the gal file, present in linuxgal for debugging, and another gal present in [...]/fs/usr/ti/bin, that has been stripped and that shall be used as executable file for a trial. The macro called 'galfs' brings you where the files has been installed:
+
+The output generated by the previous commands is the "gal" file, present in the linuxgal folder, but another gal is present in [...]/fs/usr/ti/bin (where it has been stripped). The macro called 'galfs' brings you where the files has been installed:
bin -> exe gal
lib -> librerie
etc -> config.ini
@@ -86,24 +65,29 @@
Please note that:
- In zigbee/Makefile.cross, the user could set the EMBER_STACK_PROFILE according to the ZigBee or ZigBeePRO stack required
- To enable/disable the debug, go to linuxgal/Makefile.cross and add/remove the following line in the "config" section:
-
--enable-debug \ --with-debug-flags=RB:SB:DA:MESSAGE:SA:RESTSERVER:XMLMSGCOMPOSER:GALZB:XMLMSGPARSER
+
+To restart from zero, please use the following two commands:
+make distclean
+make cleanall
+
----- Manual installation -----
-If this is the first time that the GAL has been downloaded, it shall be compiled all the following packages:
- - go to "libupnp" folder and run "make clean" and "make"
- - go to "initparser" folder and run "make clean" and "make"
- - go to "\http\shttpd\src" folder and run "make" (for cygwin type "SSL_VER=0.9.8 make cygwin")
- - go to "tinyxml\src" folder and run "make clean" and "make"
+If this is the first time that the GAL has been downloaded, it shall be compiled all the following packages (above you can find the references from where to download them):
+ - go to "CURL" folder and run "make clean" and "make"
+ - go to "libupnp" folder and run "make clean" and "make"
+ - go to "iniparser" folder and run "make clean" and "make"
+ - go to "shttpd\src" folder and run "make" (for cygwin type "SSL_VER=0.9.8 make cygwin")
+ - go to "tinyxml\src" folder and run "make clean" and "make"
Once those steps are accomplished, you're ready to compile the GAL, focusing on the two main folder, "linuxgal" and "zigbee".
- - linuxgal contains all the main files responsible to compile and execute the gal
- - zigbee contains all the file needed to setup the ZigBee or ZigBeePRO stack
+ - linuxgal contains all the main files responsible to compile and execute the gal
+ - zigbee contains all the file needed to setup the ZigBee or ZigBeePRO stack
A list of the command that shall be execute is reported below:
-export EMBER_STACK_PROFILE=1 //CHOOSE THE EMBER STACK PROFILE: 1=ZigBee or 2=ZigBeePRO
+export EMBER_STACK_PROFILE=1 //CHOOSE THE EMBER STACK PROFILE: 1=ZigBee or 2=ZigBeePRO
cd zigbee/
make clean
make
@@ -112,11 +96,10 @@
make clean
aclocal
autoheader
-automake -a
+automake -a -c
autoconf
-./configure --enable-zigbee-pro --with-local-libs=.. --with-upnp-cflags=-I/usr/local/include/upnp --with-upnp-libs=/usr/local/lib OR
-./configure --enable-zigbee-pro --with-local-libs=.. --with-upnp-cflags=-I/usr/local/include/upnp --with-upnp-libs=/usr/local/lib --enable-debug --with-debug-flags=RB:SB:DA:MESSAGE:SA:RESTSERVER:XMLMSGCOMPOSER:GALZB:XMLMSGPARSER
-make
+./configure --enable-zigbee-pro --with-local-libs=.. --with-upnp-cflags=-I/usr/local/include/upnp --with-upnp-libs=/usr/local/lib
+make -f Makefile.cross clean all install
----- Typical errors -----
@@ -294,3 +277,301 @@
libcurl HTTP option application timeout (in seconds) - Note: for remote connection between GW and IPHA insert a value higher than 1. Set to zero to completely disable caching This is a libcurl setting that the new gateway could not use in case the developer decide to manage the HTTP communication in a different way.
--------------------------------------------------------
txPeriod Select the txPeriod used during the Performance tests Obsolete setting used for performance tests, not needed anymore.
+=======
+Gateway Abstraction Layer (GAL) - A standard ZigBee Gateway Device implementation
+Copyright 2008-2013 TELECOM ITALIA S.p.A. - http://www.telecomitalia.it
+Part of this computer programs(s) may be used, reproduced, stored in any retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, under the Apache License 2.0 with the implicit approval of TELECOM ITALIA.
+
+*****************************
+***** I - Introduction ******
+*****************************
+
+This software is called Gateway Abstraction Layer (GAL), and it implements a standard ZigBee Gateway Device. It is released by TELECOM ITALIA S.p.A. (www.telecomitalia.it) and the code may be used, reproduced, stored in any retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, under the Apache License 2.0 with the implicit approval of TELECOM ITALIA.
+
+The software uses the following open source software developed by 3rd parties:
+- libupnp (current release 1.6.15). This product uses software downloaded at Sourceforge (http://sourceforge.net/projects/pupnp/files/pupnp/libUPnP%201.6.15/libupnp-1.6.15.tar.bz2/download ) licensed under the BSD License.
+- curl (current release 7.27.0). This product uses software developed Sourceforge (http://curl.haxx.se/download/curl-7.27.0.tar.gz) licensed under the MIT License.
+- tinyxml (release 2.5.3). This product uses software developed at Sourceforge (http://sourceforge.net/projects/tinyxml/files/tinyxml/2.5.3/tinyxml_2_5_3.tar.gz/download )licensed under the zlib/libpng License.
+- iniparser (release 3.1). This product uses software developed and licensed under the MIT License, freely downloadable at http://ndevilla.free.fr/iniparser/iniparser-3.1.tar.gz
+
+Also, part of this software is based on the specification provided by the ZigBee Alliance (http://www.zigbee.org), licensed under ZigBee specific license for non-member of the ZigBee Alliance.
+
+License Summary:
+ - Apache License 2.0
+ - ZigBee Non-Member License
+
+Note: shttpd (release 1.42) is a software downloaded on 2008 from http://sourceforge.net/projects/shttpd/files/shttpd/1.42/shttpd-1.42.tar.gz/download and later on modified by Telecom Italia. The project has been ported to a new project called mongoose (current release 3.1), licensed under the MIT License (but not used by GAL at the moment). The owner of the original project, Sergey Lyubka, has copyrighted the code with "THE BEER-WARE LICENSE" (Revision 42): "Sergey Lyubka wrote this file. As long as you retain this notice you can do whatever you want with this stuff. If we meet some day, and you think this stuff is worth it, you can buy me a beer in return". based on this, the shttpd project modified by Telecom Italia can be distributed together with the GAL's source code.
+
+*****************************
+***** II - References *******
+*****************************
+
+For any information related on the usage and the installation of this code please contact Andrea Ranalli (andrea.ranalli at telecomitalia.it) or Nicola Portinaro (nicola.portinaro at telecomitalia.it).
+
+
+*****************************
+*** III - Installation ******
+*****************************
+
+This short guide will describes how to configure the environment in order to use the GAL using a cygwin environment. However, any other Unix-based system can be used (clearly some steps shall be skipped or slightly edited to fit the target operating system).
+
+----- Downloading phase -----
+
+1) Please download the latest version of cygwin from www.cygwin.com, the install it by including all the following packages (please note that the releases are based on Cygwin DLL 1.7.7-1, but more update versions could be available):
+
+automake wrapper (4-10) and 1.11.1-1
+autoconf wrapper (10-1) and 2.68-1
+gcc-g++ 3.4.4-999
+openssl-devel 0.8.8r-1
+libcurl-dlevel 7.19.6-1
+[all their dependencies]
+
+Note: “libcurl-dlevel 7.19.6-1” could be avoid to be installed if we decide to configure and use the local folder 'curl' (it is recommented to use the local folder for linux O.S.)
+
+2) Download the latest release of GAL from the repository (https://svn.aaloa.org/projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL is the currently path available but this could be changed in the future) and copy the whole folder into cygwin's user home folder (or wherever you like).
+
+3) Download the open source software developed by 3rd parties companies:
+- libupnp-1.6.15 - http://sourceforge.net/projects/pupnp/files/pupnp/libUPnP%201.6.15/libupnp-1.6.15.tar.bz2/download
+- curl-7.27.0 - http://curl.haxx.se/download/curl-7.27.0.tar.gz
+- tinyxml-2.5.3 - http://sourceforge.net/projects/tinyxml/files/tinyxml/2.5.3/tinyxml_2_5_3.tar.gz/download
+- iniparser-3.1 - https://github.com/ndevilla/iniparser/archive/master.zip
+
+4) Unpack each of the above files and put them into GAL's subfolders, according to their name. Please be aware to maintain the Makefile.cross file present in each of those subfolders. For the tinyxml folder, please substitute also the makefile file. Finally, just for the iniparser, be aware that the files dictionary.h and iniparser.h has been changed to support the cross compilation for the C++ environment. In particular, the following lines has been added at the beginning and at the end of each file:
+
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+
+ #ifdef __cplusplus
+ }
+ #endif
+
+----- Automatic installation -----
+
+If you're lucky enough and if all the files have been properly downloaded and put in the right folders, starting from the gal root directory and typing the following commands should be enough:
+. setup.bash
+gal_cygwin //here "gal_something" could be typed, depending on your O.S. (please verify it inside the setup.bash file)
+cd linuxgal
+make -f Makefile.cross genmake
+cd ..
+make all
+(make distclean)
+(make all)
+
+The output generated by the previous commands is the gal file, present in linuxgal for debugging, and another gal present in [...]/fs/usr/ti/bin, that has been stripped and that shall be used as executable file for a trial. The macro called 'galfs' brings you where the files has been installed:
+bin -> exe gal
+lib -> librerie
+etc -> config.ini
+
+Please note that:
+- In zigbee/Makefile.cross, the user could set the EMBER_STACK_PROFILE according to the ZigBee or ZigBeePRO stack required
+- To enable/disable the debug, go to linuxgal/Makefile.cross and add/remove the following line in the "config" section:
+
+ --enable-debug \ --with-debug-flags=RB:SB:DA:MESSAGE:SA:RESTSERVER:XMLMSGCOMPOSER:GALZB:XMLMSGPARSER
+
+----- Manual installation -----
+
+If this is the first time that the GAL has been downloaded, it shall be compiled all the following packages:
+ - go to "libupnp" folder and run "make clean" and "make"
+ - go to "initparser" folder and run "make clean" and "make"
+ - go to "\http\shttpd\src" folder and run "make" (for cygwin type "SSL_VER=0.9.8 make cygwin")
+ - go to "tinyxml\src" folder and run "make clean" and "make"
+
+Once those steps are accomplished, you're ready to compile the GAL, focusing on the two main folder, "linuxgal" and "zigbee".
+ - linuxgal contains all the main files responsible to compile and execute the gal
+ - zigbee contains all the file needed to setup the ZigBee or ZigBeePRO stack
+
+A list of the command that shall be execute is reported below:
+
+export EMBER_STACK_PROFILE=1 //CHOOSE THE EMBER STACK PROFILE: 1=ZigBee or 2=ZigBeePRO
+cd zigbee/
+make clean
+make
+cd ..
+cd linuxgal
+make clean
+aclocal
+autoheader
+automake -a
+autoconf
+./configure --enable-zigbee-pro --with-local-libs=.. --with-upnp-cflags=-I/usr/local/include/upnp --with-upnp-libs=/usr/local/lib OR
+./configure --enable-zigbee-pro --with-local-libs=.. --with-upnp-cflags=-I/usr/local/include/upnp --with-upnp-libs=/usr/local/lib --enable-debug --with-debug-flags=RB:SB:DA:MESSAGE:SA:RESTSERVER:XMLMSGCOMPOSER:GALZB:XMLMSGPARSER
+make
+
+
+----- Typical errors -----
+
+Some useful commands that could be used to solve some initial problems are:
+make distclean - It will clean everything and force the execution of configure scripts when 'make all' is issued again
+ldd gal.exe - This is useful to figure out which dll are needed to let the gal work properly and what is still missing
+make -f Makefile.cross clean all install - Command needs to compile after modifies made in "linuxgal" or "zigBee" folders
+
+If some error occurs in "make config" or "make all", this is probably due to the fact that the curl library are not found yet by the GAL (that means they're not compiled yet). To fix this problem, launch again "make config" and "make all" and this second time it should work (alternatively run "make -f Makefile.cross all install" in linuxgal).
+
+The most typical error that a user could encounter is the wrong path for the upnp library so it must be checked first if this library is installed correctly and where it has been placed. Under the linux O.S., for example, a valid path that could be used is:
+./configure --enable-zigbee-pro --with-local-libs=.. --with-upnp-cflags=-I/usr/include/upnp --with-upnp-libs=/usr/lib
+This one will fix issues relater to the wrong position of the upnp library
+Another typical problem is related to the curl library, and for this case a useful path could be:
+./configure --enable-zigbee-pro --with-local-libs=../libs --with-upnp-cflags=-I/usr/include/upnp --with-curl-cflags=-I/usr/include/curl --with-curl-libs=/usr/lib --enable-debug
+Also, if not present, the file libcurl.so under /usr/lib shall be created using a soft link (ln -s libcurl.so.4 libcurl.so)
+
+Finally, when the gal is executed it needs to know the correct path for the upnp library. Two alternative ways to reach this goal are:
+ a) use the export command: export LD_LIBRARY_PATH=[...]/trunk/targets/freescale/fs/usr/ti/lib (use the "pwd" command to find the right path...)
+ b) copy the whole content of [...]/trunk/targets/freescale/fs/usr/ti/lib in /usr/lib
+
+
+*****************************
+******* IV - Usage **********
+*****************************
+
+The easiest way to run a GAL is by tipying the following path:
+gal.exe -s on -c config.ini 'zigbee:///dev/com9?dongle=ezsp'
+where:
+ - gal.exe is the result of the previous step (the compiling phase)
+ - config.ini is the file containing precious information regarding the configuration of the ZigBee network (like channel, panId, extendedPanID, security, etc...)
+ - 'zigbee:///dev/com9?dongle=ezsp' specify at which port your dondle is installed and that you're using a Ember firmware (called EZSP: Ember ZigBee Serial Protocol)
+
+For the Linux OS the Teleesis dongle could be found using the path 'zigbee:///dev/ttyUSB0?dongle=ezsp'.
+To run a Freescale dongle type ./gal -c config.ini 'zigbee:///dev/ttyUSB0?dongle=freescale'
+To run the GAL using the MicroSD type instead ./gal -c config.ini "zigbee:///dev/com8?dongle=microSD&speed=115200"
+
+
+*****************************
+*** V - Stack firmware ******
+*****************************
+
+Depending on the dongle used, there are different firmware that could be used. In this short tutorial we will describe only where to find the firmware for the Ember/SiliconLabs and Freescale dongles. Other stack vendors are supported as well, but they have not been updated since a while.
+
+a) Freescale
+Freescale released a software called BeeStack, that can be defined as a firmware specifically released for ZigBee dongles.
+First of all it is recommended to download the latest driver of the USB dongle from http://www.ftdichip.com/Drivers/VCP.htm, and then download the Test Tool software (currently at the revision 12) from Freescale’s website). This latter tool will allow the user to test single API and to eventually load a firmware (later on it will be introduced a tool, FlexLoader, released by the company CEDACa gateway/module manufaturer , that will do this job).
+The first thing to do is to open Test Tool, then go to "Communication setting" -> "Add Internal" and specify the COM assigned to the dongle by Windows . Then we shall check at which baud rate the firmware works (generally 115.200), select the correct value and inserting a Length equals to 1. Finally we can connect to the dongle using "View" -> "Command Console". To verify that everything works, we could create for example a ZigBee network inserting those 4 commands:
+• ZTC-CPU_Reset.Request (optional)
+• ZTC-ModeSelect.Request
+• ZTC-WriteExtAddr.Request
+• ZTC-StartNwkEx.Request
+All those commands generate a log with useful “Tx” and “Rx” line that can help us to log and debug what is happening.
+Another important file to get is the official documentation, present in one of the folder of Test Tool, where the developer can get a manual reference that explains how to use the APIs.
+
+To install a new firmware, we need to request to Freescale an updated binary file, since they are periodically update based on different Telecom Italia’s requirement, or just due to bug fixing. However, it is possible that, especially at the beginning, Telecom Italia (or the company CEDAC) will provide that firmware that is typically labeled as “BlackBox_combo_StdSecLinkKey_20120914.bin”. To update a new firmware the tool “FlexLoader” previously just cited needs to be downloaded from CEDACthe hardware manufacturer of the gateway (e.g. CEDAC/FlexGrid). The usage of this tool is quite simple, and here we report some cases:
+• To flash from zero and with a new MacAddress:
+FlexLoader.exe -brd key -prot hw -mac 00:11:22:33:44:55:66:77 myFile.bin
+• To flash a new firmware but maintain the previous Mac Address just launch
+FlexLoader -brd key -prot ztctlc my_binary.bin
+• Finally, if we want to maintain the MacAddress but we want to erase the NotVolatileMemory:
+FlexLoader -brd key -prot ztctlc -nvm erase my_binary.bin
+
+b) Ember/Silicon Labs (EZSP)
+The Ember Company has been recently acquired by Silicon Labs and thus wherever in this document the word “Ember” is found, a probable translation to the new company could be applied. Once registered to the Ember’s support web site, it is possible to download the latest release of the EM260 firmware. In particular, we are looking for the file named “em260-uart-rts-cts-with-serial-bootloader.hex”, present in the subdirectory \em260\build\em260-images of the “Ember-stack-Z3.4.x.x-em260-dev.exe” setup file .
+Finally, we are able to install the EZSP (Ember ZigBee Serial Protocol) firmware into a Telegesis dongle:
+1. Get a Telegesis dongle and connect its SIF port to the Ember Breakout board
+2. Open "InSight Desktop" tool (another tool that you can download from the Ember website) and upload the selected hex file and leave unchecked the option “Include bootloader image in upload”
+3. Set the correct baud rate by open a DOS windows, go to C:\Program Files\Ember\xIDE_EM250\SIF\bin, and launch the following two commands:
+em2xx_patch -sid 192.168.1.10 -Override -Mfg @0080=0x0008 (0x0008 means 19.2kbps)
+em2xx_read -sid 192.168.1.10 -Mfg 0x80 (use to verify that the token has been correctly written)
+where the appropriate speed can be choose selecting one of the following values:
+Value Speed (kbps)
+0x0008 19.2
+0x000A 38.4
+0x000C 57.6
+0x000F 115.2
+0x0010 230.4
+
+Please note that the "sid" option is the IP Address where the Ember Breakout board is located. To find out this parameter go to Insight Desktop and then locate the field "IP address" under the breakout board selected to do this job. Alternatively, it is easier to buy an Insight USB Link and use the following commands:
+cd "C:\Program Files\Ember\InSight USB Link"
+EM2USBLoad.exe -Run -Override em260-uart-xon-xoff-with-serial-bootloader.hex
+EM2USBPatch.exe -Override -Mfg @0080=0x000F
+EM2USBRead.exe -Mfg 0x80
+
+*****************************
+***** VI - Config.ini *******
+*****************************
+
+The current Telecom Italia’s gateway (GAL) has a useful configuration file (config.ini) which is quite important to allow the user/administrator to configure ad hoc settings before to start the gateway . In order to simplify the understanding and settings of all those variables, we will report a description for each of those parameters, followed by an important section that describes in more details what that variable stand for and how/why/if implement it.
+
+---------------------------------------------------------
+Variable - Description - Implementation status
+---------------------------------------------------------
+Platform Hardware platform desired: integration (0), zsdio/EZSP/Freescale/MicroSD (1) Since the gateway shall support different stack vendors, a variable is probably needed to do some specific calls due to the different internal architectures. Clearly this is a development-specific variable so it could be not inserted.
+---------------------------------------------------------
+autostart Autostart the ZigBee network: 0 to disable (it will wait for a StartGatewayDevice command), 1 to enabled This in an important variable useful to automatically call the StartGatewayDevice procedure using the default parameters stored in the configuration file, enabling the gateway to startup without wait any external interaction.
+---------------------------------------------------------
+startupMode Three possible scenario to startup the network:
+#0 - StartupSetMode=0x18 (CommissioningMode) AND StartupControlMode=0x00 (Association) --> To be used the first time, when the network is created
+#1 - StartupSetMode=0x00 (use NVM) AND StartupControlMode=0x04 (SilentStart) --> To be used at running time
+#2 - StartupSetMode=0x18 (CommissioningMode) AND StartupControlMode=0x04 (SilentStart) --> To be used for TC Replacement Depending of the stack vendor that will be supported, specific startup settings could be necessary: the user/administrator of the gateway shall have the possibility to decide if startup the network using a brand new ZigBee setting (commissioning mode) or if recycle an existing setting. This second part could differs from the current GAL and thus it shall be considered with attention: all the main ZigBee setting like channel radio, extendedPANId, PANId, DeviceType, etc
shall we stored in a configuration file together with an image file of the current status of the stack vendor’s memory. It shall thus be possible to reused any time a configuration before a crash, using a Not-Volatile-Memory (NVM) if it is supported by the stack, or by “flashing” those setting in a way that the node does not start a new network.
+---------------------------------------------------------
+localRegToDAnnce
+ Enable a local registration to device announcement events (1 to enable, 0 to disable)
+ The new gateway shall have this requirements always enabled so this variable can be eliminated. The target here is to be sure that any time a new node joins the network, an announcement event shall be generated to inform the upper level about this event.
+---------------------------------------------------------
+keepAliveThreshold
+ Specify how long to wait (in seconds) before to start polling each node to verify if they're still alive ('0' to disable) Please refer to paragraph 7.38.3.
+---------------------------------------------------------
+keepAliveNumberOfAttempt
+ Once keepAliveThreshold is reached, GAL tries to ping the node for 'keepAliveNumberOfAttempt' before considering it dead Please refer to paragraph 7.38.3.
+---------------------------------------------------------
+forcePingTimeout Specify in seconds a timeout before to force the gateway to send a ping (MGMT_LQI_Req) to the nodes (0 to disable) Please refer to paragraph 7.2 8.4.
+---------------------------------------------------------
+autoDiscoveryUnknownNodes
+ Automatic discovery unknown nodes before sending or after receiving a message (1 to enable, 0 to disable) This is an important feature: every time the gateway receives messages from nodes that has not been yet recognized/included in the neighbors table entry shall be polled in order to find out more information (in particular all those details needed by the gateway to have a valid entry into its database)
+---------------------------------------------------------
+gwStatusChanged_DefaultURIListener [Optional] "Callback URI listener" address. It represent the "GW Status Changed event" default URI Listener This is a development-specific variable inserted to inform an external application about the status of the gateway and its possible changes. It is an important feature but it could be implemented using API commands (a registration to this event would be enough)
+---------------------------------------------------------
+apscMaxWindowSize
+ APS level parameters (required for fragmentation services) This is a variable that solve a specific need (fragmentation) and thus probably needs to be maintained.
+---------------------------------------------------------
+apsInterframeDelay APS level parameters (required for fragmentation services) This is a variable that solve a specific need (fragmentation) and thus probably needs to be maintained.
+---------------------------------------------------------
+debugEnabled (HTTPServerDL, HTTPSessionContextDL, RESTClientDL, RESTBrokerDL, DiscoveryAgentDL, ManagementAgentDL, LocalNodeDL) To enable debug messages select "1" (0 to disable)
+Printing levels for class debugging - 0 (DEBUGGING), 1 (TEST), 3 (PRODUCTION) This is a typical variable used for debugging purpose: it allows the developer to decide what to print and which specific classes to enable. The current gateway has 3 different debug levels, but at the end only two of them are mainly used.
+---------------------------------------------------------
+DeviceType Device Type (0 =Current device type; 1=Coordinator; 2=Router; 3=End Device) Fundamental setting to decide if the gateway shall be a coordinator or router (end device is not a standard setting anymore)
+---------------------------------------------------------
+ChannelMask Default Channel Mask [valid range: 11 - 26] ZigBee channel mask: an optional feature could be to insert a mask or an “OR” symbol to allow multiple channel choice, useful in case we are a router able to join any channel or a coordinator that shall create a network where the noise is the lowest.
+---------------------------------------------------------
+PANId ZigBee Network PANId ('0xFFFF' = generate random value) Typical ZigBee setting (optionally it could be generated randomly)
+---------------------------------------------------------
+ExtendedPANId Extended PAN Id (big-endian order) Typical ZigBee setting (optionally it could be generated randomly)
+---------------------------------------------------------
+StartUpControl StartupControl (0=Association; 1=Orphan Rejoin; 2=Network Rejoin; 3=Find and Rejoin; 4=Silent Start) Typical ZigBee setting
+---------------------------------------------------------
+SecurityLevel SecurityLevel (0=Disabled, 5=Enabled) This variable is not needed anymore since all the ZigBee PRO stack shall mandatory support the security
+---------------------------------------------------------
+freescaleMACAddressValue MAC Address mode: 0=use manufacture address (stored within the dongle), 1= generate random address Any gateway shall be produced with a specific and not-editable IEEE Address, but if the stack vendor allows changing it this setting could be used.
+---------------------------------------------------------
+networkKey Default Network Key Typical ZigBee setting (optionally it could be generated randomly)
+---------------------------------------------------------
+preconfiguredLinkKey Default Trust Center Link Key - 'ZigBeeAlliance09' Typical ZigBee setting (optionally it could be generated randomly)
+---------------------------------------------------------
+DefaultEndPoint Default End Point This setting shall be expanded. In ZigBee an endpoint is linked with a SimpleDescriptor and thus this part shall be changed so that the user can specify the default simple descriptor to be used.
+---------------------------------------------------------
+TCKeyTableSize (IEEEAddressXX, TCLinkKeyXX) TCKeyTableSize - Zero to disable the TrustCenterLinkKeytable - Note: maximum number of entries is 12 for Ember, 9 for Freescale Typical ZigBee setting. If the gateway is a coordinator, this feature gives the possibility to specify special security requirements for ad hoc nodes.
+---------------------------------------------------------
+IEEE_ADDRESS Insert the Trust Center IEEE Address Trust Center setting that could be reviewed.
+---------------------------------------------------------
+JOINREQUESTPROCESSING Decide if the local ACL Conf shall be used (INSERT true) or if the WSN-C access is required (INSERT false) Trust Center setting that could be reviewed.
+---------------------------------------------------------
+LEAVENOTIFICATIONPROCESSING Decide if process locally the leave notifications without warning the WSN-C (SELECT true). Otherwise insert false Trust Center setting that could be reviewed.
+---------------------------------------------------------
+ACLFILENAME File name containing the Access Control List Trust Center setting that could be reviewed.
+---------------------------------------------------------
+NETWORKKEY The network master key, 16-bytes long Trust Center setting that could be reviewed.
+---------------------------------------------------------
+APPSECURITYTIMEOUTPERIOD The Security Timeout period (expressed in milliseconds) Trust Center setting that could be reviewed.
+---------------------------------------------------------
+UseDefaultNWKRootURI Decide if the Network Root URI can be obtained by appending the net/default' suffix (SELECT 1), or by appending the net/<ExtendedPANId>' suffix (SELECT 0) This setting could be avoided (unless it is required to certify a gateway device as standard) and keep by default the “/net/default” path since so far the gateway has been thought to be used only for one network at time.
+---------------------------------------------------------
+HelloMsgNotifyPeriod, HelloMsg_WSNCAttached_NotifyPeriod
+ Gateway Descriptor Asynchronous notification period (expressed in seconds), respectively before and after a WSN-C is attached. Note: This is like an "Hello" message to the WSN-C platform address This is an obsolete setting that could be implemented into a new API to periodically inform an application (registered to this event) about the status of the gateway. See also ‘gwStatusChanged_DefaultURIListener’ since this is a similar feature that could be implemented in a unique API.
+---------------------------------------------------------
+serverPorts Port server where to receive REST commands This is an important setting since it specifies where the gateway expects to receive REST commands.
+---------------------------------------------------------
+Ssl, sslCertFile, httpDigestAuth, httpDigestAuthPwdFile RESTServer parameters
+ Development-specific settings that depending on the new architecture could be avoided to be inserted.
+---------------------------------------------------------
+httpOptTimeout
+ libcurl HTTP option application timeout (in seconds) - Note: for remote connection between GW and IPHA insert a value higher than 1. Set to zero to completely disable caching This is a libcurl setting that the new gateway could not use in case the developer decide to manage the HTTP communication in a different way.
+--------------------------------------------------------
+txPeriod Select the txPeriod used during the Performance tests Obsolete setting used for performance tests, not needed anymore.
+>>>>>>> .r598
Modified: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/Makefile.cross
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/Makefile.cross (original)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/Makefile.cross Wed Jan 16 11:47:54 2013
@@ -19,7 +19,7 @@
genmake:
aclocal
autoheader
- automake -a
+ automake -a -c
autoconf
config:
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/Makefile.in
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/Makefile.in (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/Makefile.in Wed Jan 16 11:47:54 2013
@@ -1,0 +1,742 @@
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+# Process with automake to obtain a configuration script
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+bin_PROGRAMS = gal$(EXEEXT)
+subdir = .
+DIST_COMMON = $(am__configure_deps) $(include_HEADERS) \
+ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(srcdir)/config.h.in $(top_srcdir)/configure depcomp \
+ install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_gal_OBJECTS = main.$(OBJEXT) ZbNetDb.$(OBJEXT) \
+ CLogStorage.$(OBJEXT) CDebug.$(OBJEXT) CMessage.$(OBJEXT) \
+ GalZbIf.$(OBJEXT) GWManagement.$(OBJEXT) Agents.$(OBJEXT) \
+ XMLProcessor.$(OBJEXT) CQueryParser.$(OBJEXT) \
+ CHTTPClient.$(OBJEXT) CHTTPServer.$(OBJEXT) \
+ CResource.$(OBJEXT) CRESTServer.$(OBJEXT) \
+ CRESTClient.$(OBJEXT) CRESTBroker.$(OBJEXT) \
+ CLocalNode.$(OBJEXT) ACL.$(OBJEXT) NodeMap.$(OBJEXT) \
+ ConfigurationRepository.$(OBJEXT) StaticACLLoader.$(OBJEXT)
+gal_OBJECTS = $(am_gal_OBJECTS)
+gal_LDADD = $(LDADD)
+DEFAULT_INCLUDES = -I. at am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+ -o $@
+SOURCES = $(gal_SOURCES)
+DIST_SOURCES = $(gal_SOURCES)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign
+gal_SOURCES = \
+ main.cpp \
+ ZbNetDb.cpp \
+ CLogStorage.cpp \
+ CDebug.cpp \
+ CMessage.cpp \
+ GalZbIf.cpp \
+ GWManagement.cpp \
+ Agents.cpp \
+ XMLProcessor.cpp \
+ CQueryParser.cpp \
+ CHTTPClient.cpp \
+ CHTTPServer.cpp \
+ CResource.cpp \
+ CRESTServer.cpp \
+ CRESTClient.cpp \
+ CRESTBroker.cpp \
+ CLocalNode.cpp \
+ ACL.cpp \
+ NodeMap.cpp \
+ ConfigurationRepository.cpp \
+ StaticACLLoader.cpp
+
+include_HEADERS = \
+ CDiscoveryAgent.cpp \
+ CServiceAgent.cpp \
+ CManagementAgent.cpp \
+ CTrustCenterAgent.cpp
+
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .cpp .o .obj
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+ @if test ! -f $@; then rm -f stamp-h1; else :; fi
+ @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p; \
+ then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+gal$(EXEEXT): $(gal_OBJECTS) $(gal_DEPENDENCIES) $(EXTRA_gal_DEPENDENCIES)
+ @rm -f gal$(EXEEXT)
+ $(CXXLINK) $(gal_OBJECTS) $(gal_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/ACL.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/Agents.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CDebug.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CHTTPClient.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CHTTPServer.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CLocalNode.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CLogStorage.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CMessage.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CQueryParser.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CRESTBroker.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CRESTClient.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CRESTServer.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/CResource.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/ConfigurationRepository.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/GWManagement.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/GalZbIf.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/NodeMap.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/StaticACLLoader.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/XMLProcessor.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/ZbNetDb.Po at am__quote@
+ at AMDEP_TRUE@@am__include@ @am__quote at ./$(DEPDIR)/main.Po at am__quote@
+
+.cpp.o:
+ at am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+ at am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $<
+
+.cpp.obj:
+ at am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+ at am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ at AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+ at AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ at am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+install-includeHEADERS: $(include_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+ @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+ done
+
+uninstall-includeHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__remove_distdir)
+
+dist-lzma: distdir
+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+ $(am__remove_distdir)
+
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lzma*) \
+ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(HEADERS) config.h
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-hdr distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS
+
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+ clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \
+ dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
+ dist-zip distcheck distclean distclean-compile \
+ distclean-generic distclean-hdr distclean-tags distcleancheck \
+ distdir distuninstallcheck dvi dvi-am html html-am info \
+ info-am install install-am install-binPROGRAMS install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am \
+ install-includeHEADERS install-info install-info-am \
+ install-man install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-includeHEADERS
+
+
+distrib:
+ tar zcvf gal_$(VERSION)_$(HOSTARCH)_`date +'%Y%m%d%H%M%S'`.tar.gz -C $(PREFIX)/usr/$(EXTRA)/bin/ gal
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/aclocal.m4
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/aclocal.m4 (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/aclocal.m4 Wed Jan 16 11:47:54 2013
@@ -1,0 +1,971 @@
+# generated automatically by aclocal 1.11.3 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
+# Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
+# Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.11.3], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.3])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
+# 2010, 2011 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
+# Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
+# Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
+# Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 1
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/config.h.in
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/config.h.in (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/config.h.in Wed Jan 16 11:47:54 2013
@@ -1,0 +1,97 @@
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the <curl/curl.h> header file. */
+#undef HAVE_CURL_CURL_H
+
+/* Define to 1 if you have the <iniparser.h> header file. */
+#undef HAVE_INIPARSER_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `curl' library (-lcurl). */
+#undef HAVE_LIBCURL
+
+/* Define to 1 if you have the `dl' library (-ldl). */
+#undef HAVE_LIBDL
+
+/* Define to 1 if you have the `iniparser' library (-liniparser). */
+#undef HAVE_LIBINIPARSER
+
+/* Define to 1 if you have the `shttpd' library (-lshttpd). */
+#undef HAVE_LIBSHTTPD
+
+/* Define to 1 if you have the `threadutil' library (-lthreadutil). */
+#undef HAVE_LIBTHREADUTIL
+
+/* Define to 1 if you have the `tinyxml' library (-ltinyxml). */
+#undef HAVE_LIBTINYXML
+
+/* Define to 1 if you have the `zigbee' library (-lzigbee). */
+#undef HAVE_LIBZIGBEE
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <shttpd.h> header file. */
+#undef HAVE_SHTTPD_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <ThreadPool.h> header file. */
+#undef HAVE_THREADPOOL_H
+
+/* Define to 1 if you have the <tinyxml.h> header file. */
+#undef HAVE_TINYXML_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the <zigbee.h> header file. */
+#undef HAVE_ZIGBEE_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to support Zigbee 2006 */
+#undef ZIGBEE_2006
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure Wed Jan 16 11:47:54 2013
@@ -1,0 +1,5756 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for Linux GAL 5.3.14.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ # Preserve -v and -x to the replacement shell.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+ esac
+ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf at gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='Linux GAL'
+PACKAGE_TARNAME='linux-gal'
+PACKAGE_VERSION='5.3.14'
+PACKAGE_STRING='Linux GAL 5.3.14'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
+
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+EGREP
+GREP
+CXXCPP
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CXX
+CPPFLAGS
+LDFLAGS
+CXXFLAGS
+CXX
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_debug
+with_debug_flags
+enable_2006
+enable_zigbee_pro
+with_local_libs
+with_zblib_cflags
+with_zblib_libs
+with_upnp_cflags
+with_upnp_libs
+with_shttpd_cflags
+with_shttpd_libs
+with_curl_cflags
+with_curl_libs
+with_tinyxml_cflags
+with_tinyxml_libs
+with_iniparser_cflags
+with_iniparser_libs
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CXX
+CXXFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CCC
+CXXCPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used" >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures Linux GAL 5.3.14 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/linux-gal]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of Linux GAL 5.3.14:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-debug enable debugging
+ --enable-2006 enable zigbee 2006
+ --enable-zigbee-pro choose zigbee pro
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-debug-flags=f1:f2.. debug features to enable
+ --with-local-libs=dir default 3rd party lib (def: ..)
+ --with-zblib-cflags=dir ZigBee interface cflags
+ --with-zblib-libs=dir ZigBee library file directory
+ --with-upnp-cflags=dir upnp cflags
+ --with-upnp-libs=dir upnp library file directory
+ --with-shttpd-cflags=dir SHTTPD cflags
+ --with-shttpd-libs=dir SHTTPD library file directory
+ --with-curl-cflags=dir CURL cflags
+ --with-curl-libs=dir CURL library file directory
+ --with-tinyxml-cflags=dir TinyXML cflags
+ --with-tinyxml-libs=dir TinyXML library file directory
+ --with-iniparser-cflags=dir iniparser cflags
+ --with-iniparser-libs=dir iniparser library file directory
+
+Some influential environment variables:
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CXXCPP C++ preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+Linux GAL configure 5.3.14
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES
+# ---------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_cxx_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval \${$3+:} false; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_header_mongrel
+
+# ac_fn_cxx_try_run LINENO
+# ------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_cxx_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_run
+
+# ac_fn_cxx_check_header_compile LINENO HEADER VAR INCLUDES
+# ---------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_cxx_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_header_compile
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by Linux GAL $as_me 5.3.14, which was
+generated by GNU Autoconf 2.68. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+am__api_version='1.11'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=linuxgal
+ VERSION=5.3.14
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+ if test -n "$CCC"; then
+ CXX=$CCC
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CXX" && break
+done
+
+ if test "x$ac_ct_CXX" = x; then
+ CXX="g++"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CXX=$ac_ct_CXX
+ fi
+fi
+
+ fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5
+$as_echo_n "checking whether the C++ compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C++ compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5
+$as_echo_n "checking for C++ compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C++ compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GXX=yes
+else
+ GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+ ac_cxx_werror_flag=yes
+ ac_cv_prog_cxx_g=no
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+else
+ CXXFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+ CXXFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CXX" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
+
+
+
+
+# Start with a known set of compiler optimizations
+CXXFLAGS="-Wall"
+
+# Check whether --enable-debug was given.
+if test "${enable_debug+set}" = set; then :
+ enableval=$enable_debug; DEBUG="${enableval}"
+else
+ DEBUG="no"
+fi
+
+
+if test "x$DEBUG" = "xyes"
+then
+ CXXFLAGS="-g -O0 ${CXXFLAGS}"
+else
+ CXXFLAGS="-Os ${CXXFLAGS}"
+fi
+
+
+
+# Check whether --with-debug-flags was given.
+if test "${with_debug_flags+set}" = set; then :
+ withval=$with_debug_flags; DEBUG_FEATURES="${withval}"
+else
+ DEBUG_FEATURES=""
+fi
+
+
+# Check whether --enable-2006 was given.
+if test "${enable_2006+set}" = set; then :
+ enableval=$enable_2006; ZB_2006="${withval}"
+else
+ ZB_2006="yes"
+fi
+
+
+# Select ZigBee vs. ZigBee PRO
+# Check whether --enable-zigbee-pro was given.
+if test "${enable_zigbee_pro+set}" = set; then :
+ enableval=$enable_zigbee_pro; ZB_STACK="zigbee"
+else
+ ZB_STACK="zigbee"
+fi
+
+
+# Now we have to look around for all the headers and libs
+
+# Check whether --with-local-libs was given.
+if test "${with_local_libs+set}" = set; then :
+ withval=$with_local_libs; LOCAL_LIBS="${withval}"
+else
+ LOCAL_LIBS="${prefix}"
+fi
+
+
+
+# Check whether --with-zblib-cflags was given.
+if test "${with_zblib_cflags+set}" = set; then :
+ withval=$with_zblib_cflags; ZBLIB_CFLAGS="${withval}"
+else
+ ZBLIB_CFLAGS="-I${LOCAL_LIBS}/include"
+fi
+
+
+
+# Check whether --with-zblib-libs was given.
+if test "${with_zblib_libs+set}" = set; then :
+ withval=$with_zblib_libs; ZBLIB_LIB="${withval}"
+else
+ ZBLIB_LIB="${LOCAL_LIBS}/lib"
+fi
+
+
+
+# Check whether --with-upnp-cflags was given.
+if test "${with_upnp_cflags+set}" = set; then :
+ withval=$with_upnp_cflags; UPNP_CFLAGS="${withval}"
+else
+ UPNP_CFLAGS="-I${LOCAL_LIBS}/include/upnp"
+fi
+
+
+
+# Check whether --with-upnp-libs was given.
+if test "${with_upnp_libs+set}" = set; then :
+ withval=$with_upnp_libs; UPNP_LIB="${withval}"
+else
+ UPNP_LIB="${LOCAL_LIBS}/lib"
+fi
+
+
+
+# Check whether --with-shttpd-cflags was given.
+if test "${with_shttpd_cflags+set}" = set; then :
+ withval=$with_shttpd_cflags; SHTTPD_CFLAGS="${withval}"
+else
+ SHTTPD_CFLAGS="-I${LOCAL_LIBS}/include"
+fi
+
+
+
+# Check whether --with-shttpd-libs was given.
+if test "${with_shttpd_libs+set}" = set; then :
+ withval=$with_shttpd_libs; SHTTPD_LIB="${withval}"
+else
+ SHTTPD_LIB="${LOCAL_LIBS}/lib"
+fi
+
+
+
+# Check whether --with-curl-cflags was given.
+if test "${with_curl_cflags+set}" = set; then :
+ withval=$with_curl_cflags; CURL_CFLAGS="${withval}"
+else
+ CURL_CFLAGS="-I${LOCAL_LIBS}/include"
+fi
+
+
+
+# Check whether --with-curl-libs was given.
+if test "${with_curl_libs+set}" = set; then :
+ withval=$with_curl_libs; CURL_LIB="${withval}"
+else
+ CURL_LIB="${LOCAL_LIBS}/lib"
+fi
+
+
+
+# Check whether --with-tinyxml-cflags was given.
+if test "${with_tinyxml_cflags+set}" = set; then :
+ withval=$with_tinyxml_cflags; TINYXML_CFLAGS="${withval}"
+else
+ TINYXML_CFLAGS="-I${LOCAL_LIBS}/include"
+fi
+
+
+
+# Check whether --with-tinyxml-libs was given.
+if test "${with_tinyxml_libs+set}" = set; then :
+ withval=$with_tinyxml_libs; UPNP_LIB="${withval}"
+else
+ TINYXML_LIB="${LOCAL_LIBS}/lib"
+fi
+
+
+
+# Check whether --with-iniparser-cflags was given.
+if test "${with_iniparser_cflags+set}" = set; then :
+ withval=$with_iniparser_cflags; INIPARSER_CFLAGS="${withval}"
+else
+ INIPARSER_CFLAGS="-I${LOCAL_LIBS}/include"
+fi
+
+
+
+# Check whether --with-iniparser-libs was given.
+if test "${with_iniparser_libs+set}" = set; then :
+ withval=$with_iniparser_libs; UPNP_LIB="${withval}"
+else
+ INIPARSER_LIB="${LOCAL_LIBS}/lib"
+fi
+
+
+if test "x$ZB_2006" = "xyes"
+then
+
+$as_echo "#define ZIGBEE_2006 1" >>confdefs.h
+
+fi
+
+old_ifs="$IFS"
+IFS=":$IFS"
+for i in $DEBUG_FEATURES
+do
+ CPPFLAGS="-D DEBUG_ACTIVE_$i $CPPFLAGS"
+done
+IFS="$old_ifs"
+
+CPPFLAGS="${UPNP_CFLAGS} ${SHTTPD_CFLAGS} ${CURL_CFLAGS} ${CPPFLAGS}"
+CPPFLAGS="${TINYXML_CFLAGS} ${INIPARSER_CFLAGS} ${ZBLIB_CFLAGS} ${CPPFLAGS}"
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+ if ${ac_cv_prog_CXXCPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_cxx_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in zigbee.h
+do :
+ ac_fn_cxx_check_header_mongrel "$LINENO" "zigbee.h" "ac_cv_header_zigbee_h" "$ac_includes_default"
+if test "x$ac_cv_header_zigbee_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ZIGBEE_H 1
+_ACEOF
+
+else
+ as_fn_error $? "ZigBee interface not found" "$LINENO" 5
+fi
+
+done
+
+for ac_header in ThreadPool.h
+do :
+ ac_fn_cxx_check_header_mongrel "$LINENO" "ThreadPool.h" "ac_cv_header_ThreadPool_h" "$ac_includes_default"
+if test "x$ac_cv_header_ThreadPool_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_THREADPOOL_H 1
+_ACEOF
+
+else
+ as_fn_error $? "threadutils library from upnp package not found" "$LINENO" 5
+fi
+
+done
+
+for ac_header in shttpd.h
+do :
+ ac_fn_cxx_check_header_mongrel "$LINENO" "shttpd.h" "ac_cv_header_shttpd_h" "$ac_includes_default"
+if test "x$ac_cv_header_shttpd_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_SHTTPD_H 1
+_ACEOF
+
+else
+ as_fn_error $? "SHTTPD library not found" "$LINENO" 5
+fi
+
+done
+
+for ac_header in curl/curl.h
+do :
+ ac_fn_cxx_check_header_mongrel "$LINENO" "curl/curl.h" "ac_cv_header_curl_curl_h" "$ac_includes_default"
+if test "x$ac_cv_header_curl_curl_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_CURL_CURL_H 1
+_ACEOF
+
+else
+ as_fn_error $? "CURL library not found" "$LINENO" 5
+fi
+
+done
+
+for ac_header in tinyxml.h
+do :
+ ac_fn_cxx_check_header_mongrel "$LINENO" "tinyxml.h" "ac_cv_header_tinyxml_h" "$ac_includes_default"
+if test "x$ac_cv_header_tinyxml_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_TINYXML_H 1
+_ACEOF
+
+else
+ as_fn_error $? "TinyXML library not found" "$LINENO" 5
+fi
+
+done
+
+for ac_header in iniparser.h
+do :
+ ac_fn_cxx_check_header_mongrel "$LINENO" "iniparser.h" "ac_cv_header_iniparser_h" "$ac_includes_default"
+if test "x$ac_cv_header_iniparser_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_INIPARSER_H 1
+_ACEOF
+
+else
+ as_fn_error $? "iniparser lib not found" "$LINENO" 5
+fi
+
+done
+
+
+LDFLAGS="-L${UPNP_LIB} -L${SHTTPD_LIB} -L${CURL_LIB} ${LDFLAGS}"
+LDFLAGS="-L${TINYXML_LIB} -L${INIPARSER_LIB} -L${ZBLIB_LIB} ${LDFLAGS}"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBDL 1
+_ACEOF
+
+ LIBS="-ldl $LIBS"
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for TimerThreadInit in -lthreadutil" >&5
+$as_echo_n "checking for TimerThreadInit in -lthreadutil... " >&6; }
+if ${ac_cv_lib_threadutil_TimerThreadInit+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lthreadutil $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char TimerThreadInit ();
+int
+main ()
+{
+return TimerThreadInit ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_lib_threadutil_TimerThreadInit=yes
+else
+ ac_cv_lib_threadutil_TimerThreadInit=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_threadutil_TimerThreadInit" >&5
+$as_echo "$ac_cv_lib_threadutil_TimerThreadInit" >&6; }
+if test "x$ac_cv_lib_threadutil_TimerThreadInit" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBTHREADUTIL 1
+_ACEOF
+
+ LIBS="-lthreadutil $LIBS"
+
+else
+ as_fn_error $? "upnp headers found, however can't find libs" "$LINENO" 5
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shttpd_init in -lshttpd" >&5
+$as_echo_n "checking for shttpd_init in -lshttpd... " >&6; }
+if ${ac_cv_lib_shttpd_shttpd_init+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lshttpd -ldl -lpthread $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shttpd_init ();
+int
+main ()
+{
+return shttpd_init ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_lib_shttpd_shttpd_init=yes
+else
+ ac_cv_lib_shttpd_shttpd_init=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_shttpd_shttpd_init" >&5
+$as_echo "$ac_cv_lib_shttpd_shttpd_init" >&6; }
+if test "x$ac_cv_lib_shttpd_shttpd_init" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBSHTTPD 1
+_ACEOF
+
+ LIBS="-lshttpd $LIBS"
+
+else
+ as_fn_error $? "SHTTPD headers found, however can't find libs" "$LINENO" 5
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for curl_global_init in -lcurl" >&5
+$as_echo_n "checking for curl_global_init in -lcurl... " >&6; }
+if ${ac_cv_lib_curl_curl_global_init+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcurl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char curl_global_init ();
+int
+main ()
+{
+return curl_global_init ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_lib_curl_curl_global_init=yes
+else
+ ac_cv_lib_curl_curl_global_init=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curl_curl_global_init" >&5
+$as_echo "$ac_cv_lib_curl_curl_global_init" >&6; }
+if test "x$ac_cv_lib_curl_curl_global_init" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBCURL 1
+_ACEOF
+
+ LIBS="-lcurl $LIBS"
+
+else
+ as_fn_error $? "CURL headers found, however can't find libs" "$LINENO" 5
+fi
+
+# Is there a better way to test a C++ library?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for printf in -ltinyxml" >&5
+$as_echo_n "checking for printf in -ltinyxml... " >&6; }
+if ${ac_cv_lib_tinyxml_printf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltinyxml $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char printf ();
+int
+main ()
+{
+return printf ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_lib_tinyxml_printf=yes
+else
+ ac_cv_lib_tinyxml_printf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tinyxml_printf" >&5
+$as_echo "$ac_cv_lib_tinyxml_printf" >&6; }
+if test "x$ac_cv_lib_tinyxml_printf" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBTINYXML 1
+_ACEOF
+
+ LIBS="-ltinyxml $LIBS"
+
+else
+ as_fn_error $? "TinyXML hdrs found, however can't find libs" "$LINENO" 5
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for iniparser_load in -liniparser" >&5
+$as_echo_n "checking for iniparser_load in -liniparser... " >&6; }
+if ${ac_cv_lib_iniparser_iniparser_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-liniparser $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char iniparser_load ();
+int
+main ()
+{
+return iniparser_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_lib_iniparser_iniparser_load=yes
+else
+ ac_cv_lib_iniparser_iniparser_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_iniparser_iniparser_load" >&5
+$as_echo "$ac_cv_lib_iniparser_iniparser_load" >&6; }
+if test "x$ac_cv_lib_iniparser_iniparser_load" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBINIPARSER 1
+_ACEOF
+
+ LIBS="-liniparser $LIBS"
+
+else
+ as_fn_error $? "IniParser hdrs found, however can't find libs" "$LINENO" 5
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ZBIFConnect in -lzigbee" >&5
+$as_echo_n "checking for ZBIFConnect in -lzigbee... " >&6; }
+if ${ac_cv_lib_zigbee_ZBIFConnect+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lzigbee -ldl -lpthread $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char ZBIFConnect ();
+int
+main ()
+{
+return ZBIFConnect ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+ ac_cv_lib_zigbee_ZBIFConnect=yes
+else
+ ac_cv_lib_zigbee_ZBIFConnect=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_zigbee_ZBIFConnect" >&5
+$as_echo "$ac_cv_lib_zigbee_ZBIFConnect" >&6; }
+if test "x$ac_cv_lib_zigbee_ZBIFConnect" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBZIGBEE 1
+_ACEOF
+
+ LIBS="-lzigbee $LIBS"
+
+else
+ as_fn_error $? "zigbee headers found, however can't find libs" "$LINENO" 5
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+ac_config_files="$ac_config_files Makefile"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by Linux GAL $as_me 5.3.14, which was
+generated by GNU Autoconf 2.68. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+Linux GAL config.status 5.3.14
+configured by $0, generated by GNU Autoconf 2.68,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
Propchange: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure
------------------------------------------------------------------------------
svn:executable = *
Modified: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure.ac
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure.ac (original)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/configure.ac Wed Jan 16 11:47:54 2013
@@ -1,6 +1,6 @@
dnl Process with autoconf to obtain a configuration script
-m4_define(linuxgal_version, 5.3.13)
+m4_define(linuxgal_version, 5.3.14)
AC_INIT([Linux GAL], linuxgal_version)
AM_INIT_AUTOMAKE(linuxgal, linuxgal_version)
@@ -143,7 +143,8 @@
AC_CHECK_LIB(iniparser, iniparser_load,,
[AC_MSG_ERROR([IniParser hdrs found, however can't find libs])])
AC_CHECK_LIB(zigbee, ZBIFConnect,,
- [AC_MSG_ERROR([zigbee headers found, however can't find libs])])
+ [AC_MSG_ERROR([zigbee headers found, however can't find libs])],
+ [-ldl -lpthread])
AC_LANG_POP
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/depcomp
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/depcomp (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/depcomp Wed Jan 16 11:47:54 2013
@@ -1,0 +1,708 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2012-03-27.16; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake at gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' "$nl" < "$tmpdepfile" |
+## Some versions of gcc put a space before the ':'. On the theory
+## that the space means something, we add a space to the output as
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like '#:fec' to the end of the
+ # dependency line.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr "$nl" ' ' >> "$depfile"
+ echo >> "$depfile"
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts '$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
+ # However on
+ # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using '\':
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+ # tcc 0.9.26 (FIXME still under development at the moment of writing)
+ # will emit a similar output, but also prepend the continuation lines
+ # with horizontal tabulation characters.
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form 'foo.o: dependent.h',
+ # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # '$object: dependent.h' and one to simply 'dependent.h:'.
+ sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
+ < "$tmpdepfile" > "$depfile"
+ sed '
+ s/[ '"$tab"'][ '"$tab"']*/ /g
+ s/^ *//
+ s/ *\\*$//
+ s/^[^:]*: *//
+ /^$/d
+ /:$/d
+ s/$/ :/
+ ' < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add 'dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7)
+ if test "$libtool" = yes; then
+ showIncludes=-Wc,-showIncludes
+ else
+ showIncludes=-showIncludes
+ fi
+ "$@" $showIncludes > "$tmpdepfile"
+ stat=$?
+ grep -v '^Note: including file: ' "$tmpdepfile"
+ if test "$stat" = 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The first sed program below extracts the file names and escapes
+ # backslashes for cygpath. The second sed program outputs the file
+ # name when reading, but also accumulates all include files in the
+ # hold buffer in order to output them again at the end. This only
+ # works with sed implementations that can handle large buffers.
+ sed < "$tmpdepfile" -n '
+/^Note: including file: *\(.*\)/ {
+ s//\1/
+ s/\\/\\\\/g
+ p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+ s/.*/'"$tab"'/
+ G
+ p
+}' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7msys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for ':'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ # makedepend may prepend the VPATH from the source file name to the object.
+ # No need to regex-escape $object, excess matching of '.' is harmless.
+ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+ echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
Propchange: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/depcomp
------------------------------------------------------------------------------
svn:executable = *
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/install-sh
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/install-sh (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/install-sh Wed Jan 16 11:47:54 2013
@@ -1,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-01-19.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names problematic for `test' and other utilities.
+ case $src in
+ -* | [=\(\)!]) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+ dst=$dst_arg
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
Propchange: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/install-sh
------------------------------------------------------------------------------
svn:executable = *
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/missing
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/missing (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/missing Wed Jan 16 11:47:54 2013
@@ -1,0 +1,331 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2012-01-06.13; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake at gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison*|yacc*)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex*|flex*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG=\${$#}
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit $?
+ fi
+ ;;
+
+ makeinfo*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
Propchange: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/linuxgal/missing
------------------------------------------------------------------------------
svn:executable = *
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/curl/Makefile.cross
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/curl/Makefile.cross (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/curl/Makefile.cross Wed Jan 16 11:47:54 2013
@@ -1,0 +1,53 @@
+include ../Makefile.rules
+
+all:
+ $(MAKE) all
+
+clean:
+ rm -f *~
+ $(MAKE) clean
+
+distclean:
+ $(MAKE) distclean
+
+config:
+ ./configure \
+ --prefix=$(PREFIX_TMP) \
+ --host=$(HOSTARCH) \
+ --build=$(BUILDARCH) \
+ --disable-verbose \
+ --disable-manual \
+ --disable-debug \
+ --disable-ftp \
+ --disable-smtp \
+ --disable-file \
+ --disable-ldap \
+ --disable-ldaps \
+ --disable-dict \
+ --disable-tftp \
+ --disable-imap \
+ --disable-pop3 \
+ --disable-smtp \
+ --disable-rtsp \
+ --disable-telnet \
+ --disable-gopher \
+ --disable-proxy \
+ --disable-cookies \
+ --without-libssh2
+
+
+install:
+ $(MAKE) $@
+ mkdir -p $(PREFIX)/usr/$(EXTRA)/lib
+ mkdir -p $(PREFIX)/usr/$(EXTRA)/bin
+ install -m 644 $(PREFIX_TMP)/lib/libcurl.so.4.2.0 $(PREFIX)/usr/$(EXTRA)/lib
+ ln -sfn libcurl.so.4.2.0 $(PREFIX)/usr/$(EXTRA)/lib/libcurl.so
+ ln -sfn libcurl.so.4.2.0 $(PREFIX)/usr/$(EXTRA)/lib/libcurl.so.4
+ $(STRIP) $(PREFIX)/usr/$(EXTRA)/lib/libcurl.so.4.2.0
+
+uninstall:
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libcurl.so
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libcurl.so.4
+ rm -f $(PREFIX)/usr/$(EXTRA)/bin/curl
+ $(MAKE) $@
+
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/Makefile
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/Makefile (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/Makefile Wed Jan 16 11:47:54 2013
@@ -1,0 +1,69 @@
+#
+# iniparser Makefile
+#
+
+# Compiler settings
+CFLAGS = -O2 -fPIC -Wall -ansi -pedantic
+
+# Ar settings to build the library
+ARFLAGS = rcv
+
+SHLD = ${CC} ${CFLAGS}
+LDSHFLAGS = -shared -Wl,-Bsymbolic -Wl,-rpath -Wl,/usr/lib -Wl,-rpath,/usr/lib
+LDFLAGS = -Wl,-rpath -Wl,/usr/lib -Wl,-rpath,/usr/lib
+
+# Set RANLIB to ranlib on systems that require it (Sun OS < 4, Mac OSX)
+# RANLIB = ranlib
+RANLIB = true
+
+RM = rm -f
+
+
+# Implicit rules
+
+SUFFIXES = .o .c .h .a .so .sl
+
+COMPILE.c=$(CC) $(CFLAGS) -c
+.c.o:
+ @(echo "compiling $< ...")
+ $(COMPILE.c) -o $@ $<
+
+
+SRCS = src/iniparser.c \
+ src/dictionary.c
+
+OBJS = $(SRCS:.c=.o)
+
+
+default: libiniparser.a libiniparser.so
+
+libiniparser.a: $(OBJS)
+ echo Building libiniparser.a ...
+ $(AR) $(ARFLAGS) libiniparser.a $(OBJS)
+ #@($(RANLIB) libiniparser.a)
+
+libiniparser.so: $(OBJS)
+ $(SHLD) $(LDSHFLAGS) -o $@.0 $(OBJS) $(LDFLAGS) \
+ -Wl,-soname=`basename $@`.0
+
+clean:
+ $(RM) $(OBJS)
+
+install:
+ mkdir -p $(PREFIX_TMP)/lib
+ mkdir -p $(PREFIX_TMP)/include
+ install -m 644 libiniparser.a $(PREFIX_TMP)/lib
+ install -m 644 libiniparser.so.0 $(PREFIX_TMP)/lib
+ install -m 644 src/iniparser.h $(PREFIX_TMP)/include
+ install -m 644 src/dictionary.h $(PREFIX_TMP)/include
+
+veryclean:
+ $(RM) $(OBJS) libiniparser.a libiniparser.so*
+ rm -rf ./html ; mkdir html
+ cd test ; $(MAKE) veryclean
+
+docs:
+ @(cd doc ; $(MAKE))
+
+check:
+ @(cd test ; $(MAKE))
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/Makefile.cross
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/Makefile.cross (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/Makefile.cross Wed Jan 16 11:47:54 2013
@@ -1,0 +1,41 @@
+include ../Makefile.rules
+
+CLAGS += -Wall -Wno-format -g -DDEBUG -O2
+
+SRC = tinystr.cpp tinyxml.cpp tinyxmlerror.cpp tinyxmlparser.cpp
+
+TARGETS = libtinyxml.a
+
+.PHONY: all install clean distclean
+
+all:
+ $(MAKE) $<
+
+libtinyxml.a: tinystr.o tinyxml.o tinyxmlerror.o tinyxmlparser.o
+ @echo AR $@
+ @$(AR) r $@ $?
+
+
+clean:
+ $(MAKE) clean
+ rm -f *.a *.so* *~ src/*~
+
+distclean:
+ $(MAKE) veryclean
+
+config:
+ echo Nothing to config
+
+install:
+ mkdir -p $(PREFIX_TMP)/lib
+ mkdir -p $(PREFIX_TMP)/include
+ install -m 644 libiniparser.a $(PREFIX_TMP)/lib
+ install -m 644 libiniparser.so.0 $(PREFIX_TMP)/lib
+ install -m 644 src/iniparser.h $(PREFIX_TMP)/include
+ install -m 644 src/dictionary.h $(PREFIX_TMP)/include
+
+uninstall:
+ rm -f $(PREFIX_TMP)/lib/libiniparser.a
+ rm -f $(PREFIX_TMP)/include/iniparser.h
+ rm -f $(PREFIX_TMP)/include/dictionary.h
+
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/dictionary.h
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/dictionary.h (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/dictionary.h Wed Jan 16 11:47:54 2013
@@ -1,0 +1,174 @@
+
+/*-------------------------------------------------------------------------*/
+/**
+ @file dictionary.h
+ @author N. Devillard
+ @brief Implements a dictionary for string variables.
+
+ This module implements a simple dictionary object, i.e. a list
+ of string/string associations. This object is useful to store e.g.
+ informations retrieved from a configuration file (ini files).
+*/
+/*--------------------------------------------------------------------------*/
+
+#ifndef _DICTIONARY_H_
+#define _DICTIONARY_H_
+
+/*---------------------------------------------------------------------------
+ Includes
+ ---------------------------------------------------------------------------*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*---------------------------------------------------------------------------
+ New types
+ ---------------------------------------------------------------------------*/
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Dictionary object
+
+ This object contains a list of string/string associations. Each
+ association is identified by a unique string key. Looking up values
+ in the dictionary is speeded up by the use of a (hopefully collision-free)
+ hash function.
+ */
+/*-------------------------------------------------------------------------*/
+typedef struct _dictionary_ {
+ int n ; /** Number of entries in dictionary */
+ int size ; /** Storage size */
+ char ** val ; /** List of string values */
+ char ** key ; /** List of string keys */
+ unsigned * hash ; /** List of hash values for keys */
+} dictionary ;
+
+
+/*---------------------------------------------------------------------------
+ Function prototypes
+ ---------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Compute the hash key for a string.
+ @param key Character string to use for key.
+ @return 1 unsigned int on at least 32 bits.
+
+ This hash function has been taken from an Article in Dr Dobbs Journal.
+ This is normally a collision-free function, distributing keys evenly.
+ The key is stored anyway in the struct so that collision can be avoided
+ by comparing the key itself in last resort.
+ */
+/*--------------------------------------------------------------------------*/
+unsigned dictionary_hash(const char * key);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Create a new dictionary object.
+ @param size Optional initial size of the dictionary.
+ @return 1 newly allocated dictionary objet.
+
+ This function allocates a new dictionary object of given size and returns
+ it. If you do not know in advance (roughly) the number of entries in the
+ dictionary, give size=0.
+ */
+/*--------------------------------------------------------------------------*/
+dictionary * dictionary_new(int size);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Delete a dictionary object
+ @param d dictionary object to deallocate.
+ @return void
+
+ Deallocate a dictionary object and all memory associated to it.
+ */
+/*--------------------------------------------------------------------------*/
+void dictionary_del(dictionary * vd);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get a value from a dictionary.
+ @param d dictionary object to search.
+ @param key Key to look for in the dictionary.
+ @param def Default value to return if key not found.
+ @return 1 pointer to internally allocated character string.
+
+ This function locates a key in a dictionary and returns a pointer to its
+ value, or the passed 'def' pointer if no such key can be found in
+ dictionary. The returned character pointer points to data internal to the
+ dictionary object, you should not try to free it or modify it.
+ */
+/*--------------------------------------------------------------------------*/
+char * dictionary_get(dictionary * d, const char * key, char * def);
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Set a value in a dictionary.
+ @param d dictionary object to modify.
+ @param key Key to modify or add.
+ @param val Value to add.
+ @return int 0 if Ok, anything else otherwise
+
+ If the given key is found in the dictionary, the associated value is
+ replaced by the provided one. If the key cannot be found in the
+ dictionary, it is added to it.
+
+ It is Ok to provide a NULL value for val, but NULL values for the dictionary
+ or the key are considered as errors: the function will return immediately
+ in such a case.
+
+ Notice that if you dictionary_set a variable to NULL, a call to
+ dictionary_get will return a NULL value: the variable will be found, and
+ its value (NULL) is returned. In other words, setting the variable
+ content to NULL is equivalent to deleting the variable from the
+ dictionary. It is not possible (in this implementation) to have a key in
+ the dictionary without value.
+
+ This function returns non-zero in case of failure.
+ */
+/*--------------------------------------------------------------------------*/
+int dictionary_set(dictionary * vd, const char * key, const char * val);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Delete a key in a dictionary
+ @param d dictionary object to modify.
+ @param key Key to remove.
+ @return void
+
+ This function deletes a key in a dictionary. Nothing is done if the
+ key cannot be found.
+ */
+/*--------------------------------------------------------------------------*/
+void dictionary_unset(dictionary * d, const char * key);
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Dump a dictionary to an opened file pointer.
+ @param d Dictionary to dump
+ @param f Opened file pointer.
+ @return void
+
+ Dumps a dictionary onto an opened file pointer. Key pairs are printed out
+ as @c [Key]=[Value], one per line. It is Ok to provide stdout or stderr as
+ output file pointers.
+ */
+/*--------------------------------------------------------------------------*/
+void dictionary_dump(dictionary * d, FILE * out);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/iniparser.h
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/iniparser.h (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/iniparser/src/iniparser.h Wed Jan 16 11:47:54 2013
@@ -1,0 +1,315 @@
+
+/*-------------------------------------------------------------------------*/
+/**
+ @file iniparser.h
+ @author N. Devillard
+ @brief Parser for ini files.
+*/
+/*--------------------------------------------------------------------------*/
+
+#ifndef _INIPARSER_H_
+#define _INIPARSER_H_
+
+/*---------------------------------------------------------------------------
+ Includes
+ ---------------------------------------------------------------------------*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/*
+ * The following #include is necessary on many Unixes but not Linux.
+ * It is not needed for Windows platforms.
+ * Uncomment it if needed.
+ */
+/* #include <unistd.h> */
+
+#include "dictionary.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get number of sections in a dictionary
+ @param d Dictionary to examine
+ @return int Number of sections found in dictionary
+
+ This function returns the number of sections found in a dictionary.
+ The test to recognize sections is done on the string stored in the
+ dictionary: a section name is given as "section" whereas a key is
+ stored as "section:key", thus the test looks for entries that do not
+ contain a colon.
+
+ This clearly fails in the case a section name contains a colon, but
+ this should simply be avoided.
+
+ This function returns -1 in case of error.
+ */
+/*--------------------------------------------------------------------------*/
+
+int iniparser_getnsec(dictionary * d);
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get name for section n in a dictionary.
+ @param d Dictionary to examine
+ @param n Section number (from 0 to nsec-1).
+ @return Pointer to char string
+
+ This function locates the n-th section in a dictionary and returns
+ its name as a pointer to a string statically allocated inside the
+ dictionary. Do not free or modify the returned string!
+
+ This function returns NULL in case of error.
+ */
+/*--------------------------------------------------------------------------*/
+
+char * iniparser_getsecname(dictionary * d, int n);
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Save a dictionary to a loadable ini file
+ @param d Dictionary to dump
+ @param f Opened file pointer to dump to
+ @return void
+
+ This function dumps a given dictionary into a loadable ini file.
+ It is Ok to specify @c stderr or @c stdout as output files.
+ */
+/*--------------------------------------------------------------------------*/
+
+void iniparser_dump_ini(dictionary * d, FILE * f);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Save a dictionary section to a loadable ini file
+ @param d Dictionary to dump
+ @param s Section name of dictionary to dump
+ @param f Opened file pointer to dump to
+ @return void
+
+ This function dumps a given section of a given dictionary into a loadable ini
+ file. It is Ok to specify @c stderr or @c stdout as output files.
+ */
+/*--------------------------------------------------------------------------*/
+
+void iniparser_dumpsection_ini(dictionary * d, char * s, FILE * f);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Dump a dictionary to an opened file pointer.
+ @param d Dictionary to dump.
+ @param f Opened file pointer to dump to.
+ @return void
+
+ This function prints out the contents of a dictionary, one element by
+ line, onto the provided file pointer. It is OK to specify @c stderr
+ or @c stdout as output files. This function is meant for debugging
+ purposes mostly.
+ */
+/*--------------------------------------------------------------------------*/
+void iniparser_dump(dictionary * d, FILE * f);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get the number of keys in a section of a dictionary.
+ @param d Dictionary to examine
+ @param s Section name of dictionary to examine
+ @return Number of keys in section
+ */
+/*--------------------------------------------------------------------------*/
+int iniparser_getsecnkeys(dictionary * d, char * s);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get the number of keys in a section of a dictionary.
+ @param d Dictionary to examine
+ @param s Section name of dictionary to examine
+ @return pointer to statically allocated character strings
+
+ This function queries a dictionary and finds all keys in a given section.
+ Each pointer in the returned char pointer-to-pointer is pointing to
+ a string allocated in the dictionary; do not free or modify them.
+
+ This function returns NULL in case of error.
+ */
+/*--------------------------------------------------------------------------*/
+char ** iniparser_getseckeys(dictionary * d, char * s);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get the string associated to a key
+ @param d Dictionary to search
+ @param key Key string to look for
+ @param def Default value to return if key not found.
+ @return pointer to statically allocated character string
+
+ This function queries a dictionary for a key. A key as read from an
+ ini file is given as "section:key". If the key cannot be found,
+ the pointer passed as 'def' is returned.
+ The returned char pointer is pointing to a string allocated in
+ the dictionary, do not free or modify it.
+ */
+/*--------------------------------------------------------------------------*/
+char * iniparser_getstring(dictionary * d, const char * key, char * def);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get the string associated to a key, convert to an int
+ @param d Dictionary to search
+ @param key Key string to look for
+ @param notfound Value to return in case of error
+ @return integer
+
+ This function queries a dictionary for a key. A key as read from an
+ ini file is given as "section:key". If the key cannot be found,
+ the notfound value is returned.
+
+ Supported values for integers include the usual C notation
+ so decimal, octal (starting with 0) and hexadecimal (starting with 0x)
+ are supported. Examples:
+
+ - "42" -> 42
+ - "042" -> 34 (octal -> decimal)
+ - "0x42" -> 66 (hexa -> decimal)
+
+ Warning: the conversion may overflow in various ways. Conversion is
+ totally outsourced to strtol(), see the associated man page for overflow
+ handling.
+
+ Credits: Thanks to A. Becker for suggesting strtol()
+ */
+/*--------------------------------------------------------------------------*/
+int iniparser_getint(dictionary * d, const char * key, int notfound);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get the string associated to a key, convert to a double
+ @param d Dictionary to search
+ @param key Key string to look for
+ @param notfound Value to return in case of error
+ @return double
+
+ This function queries a dictionary for a key. A key as read from an
+ ini file is given as "section:key". If the key cannot be found,
+ the notfound value is returned.
+ */
+/*--------------------------------------------------------------------------*/
+double iniparser_getdouble(dictionary * d, const char * key, double notfound);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Get the string associated to a key, convert to a boolean
+ @param d Dictionary to search
+ @param key Key string to look for
+ @param notfound Value to return in case of error
+ @return integer
+
+ This function queries a dictionary for a key. A key as read from an
+ ini file is given as "section:key". If the key cannot be found,
+ the notfound value is returned.
+
+ A true boolean is found if one of the following is matched:
+
+ - A string starting with 'y'
+ - A string starting with 'Y'
+ - A string starting with 't'
+ - A string starting with 'T'
+ - A string starting with '1'
+
+ A false boolean is found if one of the following is matched:
+
+ - A string starting with 'n'
+ - A string starting with 'N'
+ - A string starting with 'f'
+ - A string starting with 'F'
+ - A string starting with '0'
+
+ The notfound value returned if no boolean is identified, does not
+ necessarily have to be 0 or 1.
+ */
+/*--------------------------------------------------------------------------*/
+int iniparser_getboolean(dictionary * d, const char * key, int notfound);
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Set an entry in a dictionary.
+ @param ini Dictionary to modify.
+ @param entry Entry to modify (entry name)
+ @param val New value to associate to the entry.
+ @return int 0 if Ok, -1 otherwise.
+
+ If the given entry can be found in the dictionary, it is modified to
+ contain the provided value. If it cannot be found, -1 is returned.
+ It is Ok to set val to NULL.
+ */
+/*--------------------------------------------------------------------------*/
+int iniparser_set(dictionary * ini, const char * entry, const char * val);
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Delete an entry in a dictionary
+ @param ini Dictionary to modify
+ @param entry Entry to delete (entry name)
+ @return void
+
+ If the given entry can be found, it is deleted from the dictionary.
+ */
+/*--------------------------------------------------------------------------*/
+void iniparser_unset(dictionary * ini, const char * entry);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Finds out if a given entry exists in a dictionary
+ @param ini Dictionary to search
+ @param entry Name of the entry to look for
+ @return integer 1 if entry exists, 0 otherwise
+
+ Finds out if a given entry exists in the dictionary. Since sections
+ are stored as keys with NULL associated values, this is the only way
+ of querying for the presence of sections in a dictionary.
+ */
+/*--------------------------------------------------------------------------*/
+int iniparser_find_entry(dictionary * ini, const char * entry) ;
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Parse an ini file and return an allocated dictionary object
+ @param ininame Name of the ini file to read.
+ @return Pointer to newly allocated dictionary
+
+ This is the parser for ini files. This function is called, providing
+ the name of the file to be read. It returns a dictionary object that
+ should not be accessed directly, but through accessor functions
+ instead.
+
+ The returned dictionary must be freed using iniparser_freedict().
+ */
+/*--------------------------------------------------------------------------*/
+dictionary * iniparser_load(const char * ininame);
+
+/*-------------------------------------------------------------------------*/
+/**
+ @brief Free all memory associated to an ini dictionary
+ @param d Dictionary to free
+ @return void
+
+ Free all memory associated to an ini dictionary.
+ It is mandatory to call this function before the dictionary object
+ gets out of the current context.
+ */
+/*--------------------------------------------------------------------------*/
+void iniparser_freedict(dictionary * d);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/libupnp/Makefile.cross
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/libupnp/Makefile.cross (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/libupnp/Makefile.cross Wed Jan 16 11:47:54 2013
@@ -1,0 +1,41 @@
+include ../Makefile.rules
+
+.PHONY: install clean all distclean config
+
+export CFLAGS += -I$(PREFIX_TMP)/include -I/opt/dev/iwmmxt/include
+export LDFLAGS = -L/opt/dev/iwmmxt/lib -L$(PREFIX)/usr/$(EXTRA)/lib -L$(PREFIX)/usr/local/lib
+
+all:
+ $(MAKE) all
+
+clean:
+ rm -rf *~
+ $(MAKE) clean
+
+distclean: clean
+ $(MAKE) distclean
+
+config:
+ ./configure \
+ --prefix=$(PREFIX_TMP) \
+ --host=$(HOSTARCH) \
+ --build=$(BUILDARCH)
+
+install:
+ $(MAKE) $@
+ mkdir -p $(PREFIX)/usr/$(EXTRA)/lib
+ cp $(PREFIX_TMP)/lib/libthreadutil.so.6.0.0 $(PREFIX)/usr/$(EXTRA)/lib
+ ln -sfn libthreadutil.so.6.0.0 $(PREFIX)/usr/$(EXTRA)/lib/libthreadutil.so
+ ln -sfn libthreadutil.so.6.0.0 $(PREFIX)/usr/$(EXTRA)/lib/libthreadutil.so.6
+
+uninstall:
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libixml.so
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libixml.so.2
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libixml.so.2.0.3
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libupnp.so
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libupnp.so.2
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libupnp.so.2.0.3
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libthreadutil.so
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libthreadutil.so.6
+ rm -f $(PREFIX)/usr/$(EXTRA)/lib/libthreadutil.so.6.0.0
+
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/Makefile
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/Makefile (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/Makefile Wed Jan 16 11:47:54 2013
@@ -1,0 +1,21 @@
+# Static library libtinyxml.a
+
+SRCS= tinystr.cpp tinyxml.cpp tinyxmlerror.cpp tinyxmlparser.cpp
+
+HDRS= ../include/tinystr.h ../include/tinyxml.h
+OBJS= $(SRCS:%.cpp=%.o)
+PROG= tinyxml
+CFLAGS= -c
+
+.cpp.o:
+ $(CC) $(CFLAGS) $< -o $@ -I../include
+
+
+
+lib$(PROG).a: $(OBJS)
+ $(AR) -r lib$(PROG).a $(OBJS)
+ @echo "Static library libtinyxml.a created."
+
+
+clean:
+ rm -rf *.o *.core $(PROG) lib$(PROG).a *.lib *.obj
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/Makefile.cross
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/Makefile.cross (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/Makefile.cross Wed Jan 16 11:47:54 2013
@@ -1,0 +1,35 @@
+include ../Makefile.rules
+
+CXXFLAGS += -DTIXML_USE_STL
+
+#SRC = tinystr.cpp tinyxml.cpp tinyxmlerror.cpp tinyxmlparser.cpp
+
+#TARGETS = libtinyxml.a
+
+all:
+ $(MAKE) -C .
+
+libtinyxml.a: $(SRC)/tinystr.o tinyxml.o tinyxmlerror.o tinyxmlparser.o
+ @echo AR $@
+ @$(AR) r $@ $?
+
+clean:
+ $(MAKE) clean
+ rm -f *~
+
+distclean: clean
+
+config:
+ echo Nothing to config
+
+install:
+ mkdir -p $(PREFIX_TMP)/lib
+ install -m 644 tinyxml.h $(PREFIX_TMP)/include
+ install -m 644 tinystr.h $(PREFIX_TMP)/include
+ install -m 644 libtinyxml.a $(PREFIX_TMP)/lib
+
+uninstall:
+ rm -f $(PREFIX_TMP)/lib/libtinyxml.a
+ rm -f $(PREFIX_TMP)/include/tinyxml.h
+ rm -f $(PREFIX_TMP)/include/tinystr.h
+
Added: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/tinyxml.h
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/tinyxml.h (added)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/patches/tinyxml/tinyxml.h Wed Jan 16 11:47:54 2013
@@ -1,0 +1,1804 @@
+/*
+www.sourceforge.net/projects/tinyxml
+Original code (2.0 and earlier )copyright (c) 2000-2006 Lee Thomason (www.grinninglizard.com)
+
+This software is provided 'as-is', without any express or implied
+warranty. In no event will the authors be held liable for any
+damages arising from the use of this software.
+
+Permission is granted to anyone to use this software for any
+purpose, including commercial applications, and to alter it and
+redistribute it freely, subject to the following restrictions:
+
+1. The origin of this software must not be misrepresented; you must
+not claim that you wrote the original software. If you use this
+software in a product, an acknowledgment in the product documentation
+would be appreciated but is not required.
+
+2. Altered source versions must be plainly marked as such, and
+must not be misrepresented as being the original software.
+
+3. This notice may not be removed or altered from any source
+distribution.
+*/
+
+
+#ifndef TINYXML_INCLUDED
+#define TINYXML_INCLUDED
+
+#define TIXML_USE_STL
+
+#ifdef _MSC_VER
+#pragma warning( push )
+#pragma warning( disable : 4530 )
+#pragma warning( disable : 4786 )
+#endif
+
+#include <ctype.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+
+// Help out windows:
+#if defined( _DEBUG ) && !defined( DEBUG )
+#define DEBUG
+#endif
+
+#ifdef TIXML_USE_STL
+ #include <string>
+ #include <iostream>
+ #include <sstream>
+ #define TIXML_STRING std::string
+#else
+ #include "tinystr.h"
+ #define TIXML_STRING TiXmlString
+#endif
+
+// Deprecated library function hell. Compilers want to use the
+// new safe versions. This probably doesn't fully address the problem,
+// but it gets closer. There are too many compilers for me to fully
+// test. If you get compilation troubles, undefine TIXML_SAFE
+#define TIXML_SAFE
+
+#ifdef TIXML_SAFE
+ #if defined(_MSC_VER) && (_MSC_VER >= 1400 )
+ // Microsoft visual studio, version 2005 and higher.
+ #define TIXML_SNPRINTF _snprintf_s
+ #define TIXML_SNSCANF _snscanf_s
+ #define TIXML_SSCANF sscanf_s
+ #elif defined(_MSC_VER) && (_MSC_VER >= 1200 )
+ // Microsoft visual studio, version 6 and higher.
+ //#pragma message( "Using _sn* functions." )
+ #define TIXML_SNPRINTF _snprintf
+ #define TIXML_SNSCANF _snscanf
+ #define TIXML_SSCANF sscanf
+ #elif defined(__GNUC__) && (__GNUC__ >= 3 )
+ // GCC version 3 and higher.s
+ //#warning( "Using sn* functions." )
+ #define TIXML_SNPRINTF snprintf
+ #define TIXML_SNSCANF snscanf
+ #define TIXML_SSCANF sscanf
+ #else
+ #define TIXML_SSCANF sscanf
+ #endif
+#endif
+
+class TiXmlDocument;
+class TiXmlElement;
+class TiXmlComment;
+class TiXmlUnknown;
+class TiXmlAttribute;
+class TiXmlText;
+class TiXmlDeclaration;
+class TiXmlParsingData;
+
+const int TIXML_MAJOR_VERSION = 2;
+const int TIXML_MINOR_VERSION = 5;
+const int TIXML_PATCH_VERSION = 3;
+
+/* Internal structure for tracking location of items
+ in the XML file.
+*/
+struct TiXmlCursor
+{
+ TiXmlCursor() { Clear(); }
+ void Clear() { row = col = -1; }
+
+ int row; // 0 based.
+ int col; // 0 based.
+};
+
+
+/**
+ If you call the Accept() method, it requires being passed a TiXmlVisitor
+ class to handle callbacks. For nodes that contain other nodes (Document, Element)
+ you will get called with a VisitEnter/VisitExit pair. Nodes that are always leaves
+ are simple called with Visit().
+
+ If you return 'true' from a Visit method, recursive parsing will continue. If you return
+ false, <b>no children of this node or its sibilings</b> will be Visited.
+
+ All flavors of Visit methods have a default implementation that returns 'true' (continue
+ visiting). You need to only override methods that are interesting to you.
+
+ Generally Accept() is called on the TiXmlDocument, although all nodes suppert Visiting.
+
+ You should never change the document from a callback.
+
+ @sa TiXmlNode::Accept()
+*/
+class TiXmlVisitor
+{
+public:
+ virtual ~TiXmlVisitor() {}
+
+ /// Visit a document.
+ virtual bool VisitEnter( const TiXmlDocument& /*doc*/ ) { return true; }
+ /// Visit a document.
+ virtual bool VisitExit( const TiXmlDocument& /*doc*/ ) { return true; }
+
+ /// Visit an element.
+ virtual bool VisitEnter( const TiXmlElement& /*element*/, const TiXmlAttribute* /*firstAttribute*/ ) { return true; }
+ /// Visit an element.
+ virtual bool VisitExit( const TiXmlElement& /*element*/ ) { return true; }
+
+ /// Visit a declaration
+ virtual bool Visit( const TiXmlDeclaration& /*declaration*/ ) { return true; }
+ /// Visit a text node
+ virtual bool Visit( const TiXmlText& /*text*/ ) { return true; }
+ /// Visit a comment node
+ virtual bool Visit( const TiXmlComment& /*comment*/ ) { return true; }
+ /// Visit an unknow node
+ virtual bool Visit( const TiXmlUnknown& /*unknown*/ ) { return true; }
+};
+
+// Only used by Attribute::Query functions
+enum
+{
+ TIXML_SUCCESS,
+ TIXML_NO_ATTRIBUTE,
+ TIXML_WRONG_TYPE
+};
+
+
+// Used by the parsing routines.
+enum TiXmlEncoding
+{
+ TIXML_ENCODING_UNKNOWN,
+ TIXML_ENCODING_UTF8,
+ TIXML_ENCODING_LEGACY
+};
+
+const TiXmlEncoding TIXML_DEFAULT_ENCODING = TIXML_ENCODING_UNKNOWN;
+
+/** TiXmlBase is a base class for every class in TinyXml.
+ It does little except to establish that TinyXml classes
+ can be printed and provide some utility functions.
+
+ In XML, the document and elements can contain
+ other elements and other types of nodes.
+
+ @verbatim
+ A Document can contain: Element (container or leaf)
+ Comment (leaf)
+ Unknown (leaf)
+ Declaration( leaf )
+
+ An Element can contain: Element (container or leaf)
+ Text (leaf)
+ Attributes (not on tree)
+ Comment (leaf)
+ Unknown (leaf)
+
+ A Decleration contains: Attributes (not on tree)
+ @endverbatim
+*/
+class TiXmlBase
+{
+ friend class TiXmlNode;
+ friend class TiXmlElement;
+ friend class TiXmlDocument;
+
+public:
+ TiXmlBase() : userData(0) {}
+ virtual ~TiXmlBase() {}
+
+ /** All TinyXml classes can print themselves to a filestream
+ or the string class (TiXmlString in non-STL mode, std::string
+ in STL mode.) Either or both cfile and str can be null.
+
+ This is a formatted print, and will insert
+ tabs and newlines.
+
+ (For an unformatted stream, use the << operator.)
+ */
+ virtual void Print( FILE* cfile, int depth ) const = 0;
+
+ /** The world does not agree on whether white space should be kept or
+ not. In order to make everyone happy, these global, static functions
+ are provided to set whether or not TinyXml will condense all white space
+ into a single space or not. The default is to condense. Note changing this
+ value is not thread safe.
+ */
+ static void SetCondenseWhiteSpace( bool condense ) { condenseWhiteSpace = condense; }
+
+ /// Return the current white space setting.
+ static bool IsWhiteSpaceCondensed() { return condenseWhiteSpace; }
+
+ /** Return the position, in the original source file, of this node or attribute.
+ The row and column are 1-based. (That is the first row and first column is
+ 1,1). If the returns values are 0 or less, then the parser does not have
+ a row and column value.
+
+ Generally, the row and column value will be set when the TiXmlDocument::Load(),
+ TiXmlDocument::LoadFile(), or any TiXmlNode::Parse() is called. It will NOT be set
+ when the DOM was created from operator>>.
+
+ The values reflect the initial load. Once the DOM is modified programmatically
+ (by adding or changing nodes and attributes) the new values will NOT update to
+ reflect changes in the document.
+
+ There is a minor performance cost to computing the row and column. Computation
+ can be disabled if TiXmlDocument::SetTabSize() is called with 0 as the value.
+
+ @sa TiXmlDocument::SetTabSize()
+ */
+ int Row() const { return location.row + 1; }
+ int Column() const { return location.col + 1; } ///< See Row()
+
+ void SetUserData( void* user ) { userData = user; } ///< Set a pointer to arbitrary user data.
+ void* GetUserData() { return userData; } ///< Get a pointer to arbitrary user data.
+ const void* GetUserData() const { return userData; } ///< Get a pointer to arbitrary user data.
+
+ // Table that returs, for a given lead byte, the total number of bytes
+ // in the UTF-8 sequence.
+ static const int utf8ByteTable[256];
+
+ virtual const char* Parse( const char* p,
+ TiXmlParsingData* data,
+ TiXmlEncoding encoding /*= TIXML_ENCODING_UNKNOWN */ ) = 0;
+
+ /** Expands entities in a string. Note this should not contian the tag's '<', '>', etc,
+ or they will be transformed into entities!
+ */
+ static void EncodeString( const TIXML_STRING& str, TIXML_STRING* out );
+
+ enum
+ {
+ TIXML_NO_ERROR = 0,
+ TIXML_ERROR,
+ TIXML_ERROR_OPENING_FILE,
+ TIXML_ERROR_OUT_OF_MEMORY,
+ TIXML_ERROR_PARSING_ELEMENT,
+ TIXML_ERROR_FAILED_TO_READ_ELEMENT_NAME,
+ TIXML_ERROR_READING_ELEMENT_VALUE,
+ TIXML_ERROR_READING_ATTRIBUTES,
+ TIXML_ERROR_PARSING_EMPTY,
+ TIXML_ERROR_READING_END_TAG,
+ TIXML_ERROR_PARSING_UNKNOWN,
+ TIXML_ERROR_PARSING_COMMENT,
+ TIXML_ERROR_PARSING_DECLARATION,
+ TIXML_ERROR_DOCUMENT_EMPTY,
+ TIXML_ERROR_EMBEDDED_NULL,
+ TIXML_ERROR_PARSING_CDATA,
+ TIXML_ERROR_DOCUMENT_TOP_ONLY,
+
+ TIXML_ERROR_STRING_COUNT
+ };
+
+protected:
+
+ static const char* SkipWhiteSpace( const char*, TiXmlEncoding encoding );
+ inline static bool IsWhiteSpace( char c )
+ {
+ return ( isspace( (unsigned char) c ) || c == '\n' || c == '\r' );
+ }
+ inline static bool IsWhiteSpace( int c )
+ {
+ if ( c < 256 )
+ return IsWhiteSpace( (char) c );
+ return false; // Again, only truly correct for English/Latin...but usually works.
+ }
+
+ #ifdef TIXML_USE_STL
+ static bool StreamWhiteSpace( std::istream * in, TIXML_STRING * tag );
+ static bool StreamTo( std::istream * in, int character, TIXML_STRING * tag );
+ #endif
+
+ /* Reads an XML name into the string provided. Returns
+ a pointer just past the last character of the name,
+ or 0 if the function has an error.
+ */
+ static const char* ReadName( const char* p, TIXML_STRING* name, TiXmlEncoding encoding );
+
+ /* Reads text. Returns a pointer past the given end tag.
+ Wickedly complex options, but it keeps the (sensitive) code in one place.
+ */
+ static const char* ReadText( const char* in, // where to start
+ TIXML_STRING* text, // the string read
+ bool ignoreWhiteSpace, // whether to keep the white space
+ const char* endTag, // what ends this text
+ bool ignoreCase, // whether to ignore case in the end tag
+ TiXmlEncoding encoding ); // the current encoding
+
+ // If an entity has been found, transform it into a character.
+ static const char* GetEntity( const char* in, char* value, int* length, TiXmlEncoding encoding );
+
+ // Get a character, while interpreting entities.
+ // The length can be from 0 to 4 bytes.
+ inline static const char* GetChar( const char* p, char* _value, int* length, TiXmlEncoding encoding )
+ {
+ assert( p );
+ if ( encoding == TIXML_ENCODING_UTF8 )
+ {
+ *length = utf8ByteTable[ *((const unsigned char*)p) ];
+ assert( *length >= 0 && *length < 5 );
+ }
+ else
+ {
+ *length = 1;
+ }
+
+ if ( *length == 1 )
+ {
+ if ( *p == '&' )
+ return GetEntity( p, _value, length, encoding );
+ *_value = *p;
+ return p+1;
+ }
+ else if ( *length )
+ {
+ //strncpy( _value, p, *length ); // lots of compilers don't like this function (unsafe),
+ // and the null terminator isn't needed
+ for( int i=0; p[i] && i<*length; ++i ) {
+ _value[i] = p[i];
+ }
+ return p + (*length);
+ }
+ else
+ {
+ // Not valid text.
+ return 0;
+ }
+ }
+
+ // Return true if the next characters in the stream are any of the endTag sequences.
+ // Ignore case only works for english, and should only be relied on when comparing
+ // to English words: StringEqual( p, "version", true ) is fine.
+ static bool StringEqual( const char* p,
+ const char* endTag,
+ bool ignoreCase,
+ TiXmlEncoding encoding );
+
+ static const char* errorString[ TIXML_ERROR_STRING_COUNT ];
+
+ TiXmlCursor location;
+
+ /// Field containing a generic user pointer
+ void* userData;
+
+ // None of these methods are reliable for any language except English.
+ // Good for approximation, not great for accuracy.
+ static int IsAlpha( unsigned char anyByte, TiXmlEncoding encoding );
+ static int IsAlphaNum( unsigned char anyByte, TiXmlEncoding encoding );
+ inline static int ToLower( int v, TiXmlEncoding encoding )
+ {
+ if ( encoding == TIXML_ENCODING_UTF8 )
+ {
+ if ( v < 128 ) return tolower( v );
+ return v;
+ }
+ else
+ {
+ return tolower( v );
+ }
+ }
+ static void ConvertUTF32ToUTF8( unsigned long input, char* output, int* length );
+
+private:
+ TiXmlBase( const TiXmlBase& ); // not implemented.
+ void operator=( const TiXmlBase& base ); // not allowed.
+
+ struct Entity
+ {
+ const char* str;
+ unsigned int strLength;
+ char chr;
+ };
+ enum
+ {
+ NUM_ENTITY = 5,
+ MAX_ENTITY_LENGTH = 6
+
+ };
+ static Entity entity[ NUM_ENTITY ];
+ static bool condenseWhiteSpace;
+};
+
+
+/** The parent class for everything in the Document Object Model.
+ (Except for attributes).
+ Nodes have siblings, a parent, and children. A node can be
+ in a document, or stand on its own. The type of a TiXmlNode
+ can be queried, and it can be cast to its more defined type.
+*/
+class TiXmlNode : public TiXmlBase
+{
+ friend class TiXmlDocument;
+ friend class TiXmlElement;
+
+public:
+ #ifdef TIXML_USE_STL
+
+ /** An input stream operator, for every class. Tolerant of newlines and
+ formatting, but doesn't expect them.
+ */
+ friend std::istream& operator >> (std::istream& in, TiXmlNode& base);
+
+ /** An output stream operator, for every class. Note that this outputs
+ without any newlines or formatting, as opposed to Print(), which
+ includes tabs and new lines.
+
+ The operator<< and operator>> are not completely symmetric. Writing
+ a node to a stream is very well defined. You'll get a nice stream
+ of output, without any extra whitespace or newlines.
+
+ But reading is not as well defined. (As it always is.) If you create
+ a TiXmlElement (for example) and read that from an input stream,
+ the text needs to define an element or junk will result. This is
+ true of all input streams, but it's worth keeping in mind.
+
+ A TiXmlDocument will read nodes until it reads a root element, and
+ all the children of that root element.
+ */
+ friend std::ostream& operator<< (std::ostream& out, const TiXmlNode& base);
+
+ /// Appends the XML node or attribute to a std::string.
+ friend std::string& operator<< (std::string& out, const TiXmlNode& base );
+
+ #endif
+
+ /** The types of XML nodes supported by TinyXml. (All the
+ unsupported types are picked up by UNKNOWN.)
+ */
+ enum NodeType
+ {
+ DOCUMENT,
+ ELEMENT,
+ COMMENT,
+ UNKNOWN,
+ TEXT,
+ DECLARATION,
+ TYPECOUNT
+ };
+
+ virtual ~TiXmlNode();
+
+ /** The meaning of 'value' changes for the specific type of
+ TiXmlNode.
+ @verbatim
+ Document: filename of the xml file
+ Element: name of the element
+ Comment: the comment text
+ Unknown: the tag contents
+ Text: the text string
+ @endverbatim
+
+ The subclasses will wrap this function.
+ */
+ const char *Value() const { return value.c_str (); }
+
+ #ifdef TIXML_USE_STL
+ /** Return Value() as a std::string. If you only use STL,
+ this is more efficient than calling Value().
+ Only available in STL mode.
+ */
+ const std::string& ValueStr() const { return value; }
+ #endif
+
+ const TIXML_STRING& ValueTStr() const { return value; }
+
+ /** Changes the value of the node. Defined as:
+ @verbatim
+ Document: filename of the xml file
+ Element: name of the element
+ Comment: the comment text
+ Unknown: the tag contents
+ Text: the text string
+ @endverbatim
+ */
+ void SetValue(const char * _value) { value = _value;}
+
+ #ifdef TIXML_USE_STL
+ /// STL std::string form.
+ void SetValue( const std::string& _value ) { value = _value; }
+ #endif
+
+ /// Delete all the children of this node. Does not affect 'this'.
+ void Clear();
+
+ /// One step up the DOM.
+ TiXmlNode* Parent() { return parent; }
+ const TiXmlNode* Parent() const { return parent; }
+
+ const TiXmlNode* FirstChild() const { return firstChild; } ///< The first child of this node. Will be null if there are no children.
+ TiXmlNode* FirstChild() { return firstChild; }
+ const TiXmlNode* FirstChild( const char * value ) const; ///< The first child of this node with the matching 'value'. Will be null if none found.
+ /// The first child of this node with the matching 'value'. Will be null if none found.
+ TiXmlNode* FirstChild( const char * _value ) {
+ // Call through to the const version - safe since nothing is changed. Exiting syntax: cast this to a const (always safe)
+ // call the method, cast the return back to non-const.
+ return const_cast< TiXmlNode* > ((const_cast< const TiXmlNode* >(this))->FirstChild( _value ));
+ }
+ const TiXmlNode* LastChild() const { return lastChild; } /// The last child of this node. Will be null if there are no children.
+ TiXmlNode* LastChild() { return lastChild; }
+
+ const TiXmlNode* LastChild( const char * value ) const; /// The last child of this node matching 'value'. Will be null if there are no children.
+ TiXmlNode* LastChild( const char * _value ) {
+ return const_cast< TiXmlNode* > ((const_cast< const TiXmlNode* >(this))->LastChild( _value ));
+ }
+
+ #ifdef TIXML_USE_STL
+ const TiXmlNode* FirstChild( const std::string& _value ) const { return FirstChild (_value.c_str ()); } ///< STL std::string form.
+ TiXmlNode* FirstChild( const std::string& _value ) { return FirstChild (_value.c_str ()); } ///< STL std::string form.
+ const TiXmlNode* LastChild( const std::string& _value ) const { return LastChild (_value.c_str ()); } ///< STL std::string form.
+ TiXmlNode* LastChild( const std::string& _value ) { return LastChild (_value.c_str ()); } ///< STL std::string form.
+ #endif
+
+ /** An alternate way to walk the children of a node.
+ One way to iterate over nodes is:
+ @verbatim
+ for( child = parent->FirstChild(); child; child = child->NextSibling() )
+ @endverbatim
+
+ IterateChildren does the same thing with the syntax:
+ @verbatim
+ child = 0;
+ while( child = parent->IterateChildren( child ) )
+ @endverbatim
+
+ IterateChildren takes the previous child as input and finds
+ the next one. If the previous child is null, it returns the
+ first. IterateChildren will return null when done.
+ */
+ const TiXmlNode* IterateChildren( const TiXmlNode* previous ) const;
+ TiXmlNode* IterateChildren( const TiXmlNode* previous ) {
+ return const_cast< TiXmlNode* >( (const_cast< const TiXmlNode* >(this))->IterateChildren( previous ) );
+ }
+
+ /// This flavor of IterateChildren searches for children with a particular 'value'
+ const TiXmlNode* IterateChildren( const char * value, const TiXmlNode* previous ) const;
+ TiXmlNode* IterateChildren( const char * _value, const TiXmlNode* previous ) {
+ return const_cast< TiXmlNode* >( (const_cast< const TiXmlNode* >(this))->IterateChildren( _value, previous ) );
+ }
+
+ #ifdef TIXML_USE_STL
+ const TiXmlNode* IterateChildren( const std::string& _value, const TiXmlNode* previous ) const { return IterateChildren (_value.c_str (), previous); } ///< STL std::string form.
+ TiXmlNode* IterateChildren( const std::string& _value, const TiXmlNode* previous ) { return IterateChildren (_value.c_str (), previous); } ///< STL std::string form.
+ #endif
+
+ /** Add a new node related to this. Adds a child past the LastChild.
+ Returns a pointer to the new object or NULL if an error occured.
+ */
+ TiXmlNode* InsertEndChild( const TiXmlNode& addThis );
+
+
+ /** Add a new node related to this. Adds a child past the LastChild.
+
+ NOTE: the node to be added is passed by pointer, and will be
+ henceforth owned (and deleted) by tinyXml. This method is efficient
+ and avoids an extra copy, but should be used with care as it
+ uses a different memory model than the other insert functions.
+
+ @sa InsertEndChild
+ */
+ TiXmlNode* LinkEndChild( TiXmlNode* addThis );
+
+ /** Add a new node related to this. Adds a child before the specified child.
+ Returns a pointer to the new object or NULL if an error occured.
+ */
+ TiXmlNode* InsertBeforeChild( TiXmlNode* beforeThis, const TiXmlNode& addThis );
+
+ /** Add a new node related to this. Adds a child after the specified child.
+ Returns a pointer to the new object or NULL if an error occured.
+ */
+ TiXmlNode* InsertAfterChild( TiXmlNode* afterThis, const TiXmlNode& addThis );
+
+ /** Replace a child of this node.
+ Returns a pointer to the new object or NULL if an error occured.
+ */
+ TiXmlNode* ReplaceChild( TiXmlNode* replaceThis, const TiXmlNode& withThis );
+
+ /// Delete a child of this node.
+ bool RemoveChild( TiXmlNode* removeThis );
+
+ /// Navigate to a sibling node.
+ const TiXmlNode* PreviousSibling() const { return prev; }
+ TiXmlNode* PreviousSibling() { return prev; }
+
+ /// Navigate to a sibling node.
+ const TiXmlNode* PreviousSibling( const char * ) const;
+ TiXmlNode* PreviousSibling( const char *_prev ) {
+ return const_cast< TiXmlNode* >( (const_cast< const TiXmlNode* >(this))->PreviousSibling( _prev ) );
+ }
+
+ #ifdef TIXML_USE_STL
+ const TiXmlNode* PreviousSibling( const std::string& _value ) const { return PreviousSibling (_value.c_str ()); } ///< STL std::string form.
+ TiXmlNode* PreviousSibling( const std::string& _value ) { return PreviousSibling (_value.c_str ()); } ///< STL std::string form.
+ const TiXmlNode* NextSibling( const std::string& _value) const { return NextSibling (_value.c_str ()); } ///< STL std::string form.
+ TiXmlNode* NextSibling( const std::string& _value) { return NextSibling (_value.c_str ()); } ///< STL std::string form.
+ #endif
+
+ /// Navigate to a sibling node.
+ const TiXmlNode* NextSibling() const { return next; }
+ TiXmlNode* NextSibling() { return next; }
+
+ /// Navigate to a sibling node with the given 'value'.
+ const TiXmlNode* NextSibling( const char * ) const;
+ TiXmlNode* NextSibling( const char* _next ) {
+ return const_cast< TiXmlNode* >( (const_cast< const TiXmlNode* >(this))->NextSibling( _next ) );
+ }
+
+ /** Convenience function to get through elements.
+ Calls NextSibling and ToElement. Will skip all non-Element
+ nodes. Returns 0 if there is not another element.
+ */
+ const TiXmlElement* NextSiblingElement() const;
+ TiXmlElement* NextSiblingElement() {
+ return const_cast< TiXmlElement* >( (const_cast< const TiXmlNode* >(this))->NextSiblingElement() );
+ }
+
+ /** Convenience function to get through elements.
+ Calls NextSibling and ToElement. Will skip all non-Element
+ nodes. Returns 0 if there is not another element.
+ */
+ const TiXmlElement* NextSiblingElement( const char * ) const;
+ TiXmlElement* NextSiblingElement( const char *_next ) {
+ return const_cast< TiXmlElement* >( (const_cast< const TiXmlNode* >(this))->NextSiblingElement( _next ) );
+ }
+
+ #ifdef TIXML_USE_STL
+ const TiXmlElement* NextSiblingElement( const std::string& _value) const { return NextSiblingElement (_value.c_str ()); } ///< STL std::string form.
+ TiXmlElement* NextSiblingElement( const std::string& _value) { return NextSiblingElement (_value.c_str ()); } ///< STL std::string form.
+ #endif
+
+ /// Convenience function to get through elements.
+ const TiXmlElement* FirstChildElement() const;
+ TiXmlElement* FirstChildElement() {
+ return const_cast< TiXmlElement* >( (const_cast< const TiXmlNode* >(this))->FirstChildElement() );
+ }
+
+ /// Convenience function to get through elements.
+ const TiXmlElement* FirstChildElement( const char * _value ) const;
+ TiXmlElement* FirstChildElement( const char * _value ) {
+ return const_cast< TiXmlElement* >( (const_cast< const TiXmlNode* >(this))->FirstChildElement( _value ) );
+ }
+
+ #ifdef TIXML_USE_STL
+ const TiXmlElement* FirstChildElement( const std::string& _value ) const { return FirstChildElement (_value.c_str ()); } ///< STL std::string form.
+ TiXmlElement* FirstChildElement( const std::string& _value ) { return FirstChildElement (_value.c_str ()); } ///< STL std::string form.
+ #endif
+
+ /** Query the type (as an enumerated value, above) of this node.
+ The possible types are: DOCUMENT, ELEMENT, COMMENT,
+ UNKNOWN, TEXT, and DECLARATION.
+ */
+ int Type() const { return type; }
+
+ /** Return a pointer to the Document this node lives in.
+ Returns null if not in a document.
+ */
+ const TiXmlDocument* GetDocument() const;
+ TiXmlDocument* GetDocument() {
+ return const_cast< TiXmlDocument* >( (const_cast< const TiXmlNode* >(this))->GetDocument() );
+ }
+
+ /// Returns true if this node has no children.
+ bool NoChildren() const { return !firstChild; }
+
+ virtual const TiXmlDocument* ToDocument() const { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual const TiXmlElement* ToElement() const { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual const TiXmlComment* ToComment() const { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual const TiXmlUnknown* ToUnknown() const { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual const TiXmlText* ToText() const { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual const TiXmlDeclaration* ToDeclaration() const { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+
+ virtual TiXmlDocument* ToDocument() { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual TiXmlElement* ToElement() { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual TiXmlComment* ToComment() { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual TiXmlUnknown* ToUnknown() { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual TiXmlText* ToText() { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+ virtual TiXmlDeclaration* ToDeclaration() { return 0; } ///< Cast to a more defined type. Will return null if not of the requested type.
+
+ /** Create an exact duplicate of this node and return it. The memory must be deleted
+ by the caller.
+ */
+ virtual TiXmlNode* Clone() const = 0;
+
+ /** Accept a hierchical visit the nodes in the TinyXML DOM. Every node in the
+ XML tree will be conditionally visited and the host will be called back
+ via the TiXmlVisitor interface.
+
+ This is essentially a SAX interface for TinyXML. (Note however it doesn't re-parse
+ the XML for the callbacks, so the performance of TinyXML is unchanged by using this
+ interface versus any other.)
+
+ The interface has been based on ideas from:
+
+ - http://www.saxproject.org/
+ - http://c2.com/cgi/wiki?HierarchicalVisitorPattern
+
+ Which are both good references for "visiting".
+
+ An example of using Accept():
+ @verbatim
+ TiXmlPrinter printer;
+ tinyxmlDoc.Accept( &printer );
+ const char* xmlcstr = printer.CStr();
+ @endverbatim
+ */
+ virtual bool Accept( TiXmlVisitor* visitor ) const = 0;
+
+protected:
+ TiXmlNode( NodeType _type );
+
+ // Copy to the allocated object. Shared functionality between Clone, Copy constructor,
+ // and the assignment operator.
+ void CopyTo( TiXmlNode* target ) const;
+
+ #ifdef TIXML_USE_STL
+ // The real work of the input operator.
+ virtual void StreamIn( std::istream* in, TIXML_STRING* tag ) = 0;
+ #endif
+
+ // Figure out what is at *p, and parse it. Returns null if it is not an xml node.
+ TiXmlNode* Identify( const char* start, TiXmlEncoding encoding );
+
+ TiXmlNode* parent;
+ NodeType type;
+
+ TiXmlNode* firstChild;
+ TiXmlNode* lastChild;
+
+ TIXML_STRING value;
+
+ TiXmlNode* prev;
+ TiXmlNode* next;
+
+private:
+ TiXmlNode( const TiXmlNode& ); // not implemented.
+ void operator=( const TiXmlNode& base ); // not allowed.
+};
+
+
+/** An attribute is a name-value pair. Elements have an arbitrary
+ number of attributes, each with a unique name.
+
+ @note The attributes are not TiXmlNodes, since they are not
+ part of the tinyXML document object model. There are other
+ suggested ways to look at this problem.
+*/
+class TiXmlAttribute : public TiXmlBase
+{
+ friend class TiXmlAttributeSet;
+
+public:
+ /// Construct an empty attribute.
+ TiXmlAttribute() : TiXmlBase()
+ {
+ document = 0;
+ prev = next = 0;
+ }
+
+ #ifdef TIXML_USE_STL
+ /// std::string constructor.
+ TiXmlAttribute( const std::string& _name, const std::string& _value )
+ {
+ name = _name;
+ value = _value;
+ document = 0;
+ prev = next = 0;
+ }
+ #endif
+
+ /// Construct an attribute with a name and value.
+ TiXmlAttribute( const char * _name, const char * _value )
+ {
+ name = _name;
+ value = _value;
+ document = 0;
+ prev = next = 0;
+ }
+
+ const char* Name() const { return name.c_str(); } ///< Return the name of this attribute.
+ const char* Value() const { return value.c_str(); } ///< Return the value of this attribute.
+ #ifdef TIXML_USE_STL
+ const std::string& ValueStr() const { return value; } ///< Return the value of this attribute.
+ #endif
+ int IntValue() const; ///< Return the value of this attribute, converted to an integer.
+ double DoubleValue() const; ///< Return the value of this attribute, converted to a double.
+
+ // Get the tinyxml string representation
+ const TIXML_STRING& NameTStr() const { return name; }
+
+ /** QueryIntValue examines the value string. It is an alternative to the
+ IntValue() method with richer error checking.
+ If the value is an integer, it is stored in 'value' and
+ the call returns TIXML_SUCCESS. If it is not
+ an integer, it returns TIXML_WRONG_TYPE.
+
+ A specialized but useful call. Note that for success it returns 0,
+ which is the opposite of almost all other TinyXml calls.
+ */
+ int QueryIntValue( int* _value ) const;
+ /// QueryDoubleValue examines the value string. See QueryIntValue().
+ int QueryDoubleValue( double* _value ) const;
+
+ void SetName( const char* _name ) { name = _name; } ///< Set the name of this attribute.
+ void SetValue( const char* _value ) { value = _value; } ///< Set the value.
+
+ void SetIntValue( int _value ); ///< Set the value from an integer.
+ void SetDoubleValue( double _value ); ///< Set the value from a double.
+
+ #ifdef TIXML_USE_STL
+ /// STL std::string form.
+ void SetName( const std::string& _name ) { name = _name; }
+ /// STL std::string form.
+ void SetValue( const std::string& _value ) { value = _value; }
+ #endif
+
+ /// Get the next sibling attribute in the DOM. Returns null at end.
+ const TiXmlAttribute* Next() const;
+ TiXmlAttribute* Next() {
+ return const_cast< TiXmlAttribute* >( (const_cast< const TiXmlAttribute* >(this))->Next() );
+ }
+
+ /// Get the previous sibling attribute in the DOM. Returns null at beginning.
+ const TiXmlAttribute* Previous() const;
+ TiXmlAttribute* Previous() {
+ return const_cast< TiXmlAttribute* >( (const_cast< const TiXmlAttribute* >(this))->Previous() );
+ }
+
+ bool operator==( const TiXmlAttribute& rhs ) const { return rhs.name == name; }
+ bool operator<( const TiXmlAttribute& rhs ) const { return name < rhs.name; }
+ bool operator>( const TiXmlAttribute& rhs ) const { return name > rhs.name; }
+
+ /* Attribute parsing starts: first letter of the name
+ returns: the next char after the value end quote
+ */
+ virtual const char* Parse( const char* p, TiXmlParsingData* data, TiXmlEncoding encoding );
+
+ // Prints this Attribute to a FILE stream.
+ virtual void Print( FILE* cfile, int depth ) const {
+ Print( cfile, depth, 0 );
+ }
+ void Print( FILE* cfile, int depth, TIXML_STRING* str ) const;
+
+ // [internal use]
+ // Set the document pointer so the attribute can report errors.
+ void SetDocument( TiXmlDocument* doc ) { document = doc; }
+
+private:
+ TiXmlAttribute( const TiXmlAttribute& ); // not implemented.
+ void operator=( const TiXmlAttribute& base ); // not allowed.
+
+ TiXmlDocument* document; // A pointer back to a document, for error reporting.
+ TIXML_STRING name;
+ TIXML_STRING value;
+ TiXmlAttribute* prev;
+ TiXmlAttribute* next;
+};
+
+
+/* A class used to manage a group of attributes.
+ It is only used internally, both by the ELEMENT and the DECLARATION.
+
+ The set can be changed transparent to the Element and Declaration
+ classes that use it, but NOT transparent to the Attribute
+ which has to implement a next() and previous() method. Which makes
+ it a bit problematic and prevents the use of STL.
+
+ This version is implemented with circular lists because:
+ - I like circular lists
+ - it demonstrates some independence from the (typical) doubly linked list.
+*/
+class TiXmlAttributeSet
+{
+public:
+ TiXmlAttributeSet();
+ ~TiXmlAttributeSet();
+
+ void Add( TiXmlAttribute* attribute );
+ void Remove( TiXmlAttribute* attribute );
+
+ const TiXmlAttribute* First() const { return ( sentinel.next == &sentinel ) ? 0 : sentinel.next; }
+ TiXmlAttribute* First() { return ( sentinel.next == &sentinel ) ? 0 : sentinel.next; }
+ const TiXmlAttribute* Last() const { return ( sentinel.prev == &sentinel ) ? 0 : sentinel.prev; }
+ TiXmlAttribute* Last() { return ( sentinel.prev == &sentinel ) ? 0 : sentinel.prev; }
+
+ const TiXmlAttribute* Find( const char* _name ) const;
+ TiXmlAttribute* Find( const char* _name ) {
+ return const_cast< TiXmlAttribute* >( (const_cast< const TiXmlAttributeSet* >(this))->Find( _name ) );
+ }
+ #ifdef TIXML_USE_STL
+ const TiXmlAttribute* Find( const std::string& _name ) const;
+ TiXmlAttribute* Find( const std::string& _name ) {
+ return const_cast< TiXmlAttribute* >( (const_cast< const TiXmlAttributeSet* >(this))->Find( _name ) );
+ }
+
+ #endif
+
+private:
+ //*ME: Because of hidden/disabled copy-construktor in TiXmlAttribute (sentinel-element),
+ //*ME: this class must be also use a hidden/disabled copy-constructor !!!
+ TiXmlAttributeSet( const TiXmlAttributeSet& ); // not allowed
+ void operator=( const TiXmlAttributeSet& ); // not allowed (as TiXmlAttribute)
+
+ TiXmlAttribute sentinel;
+};
+
+
+/** The element is a container class. It has a value, the element name,
+ and can contain other elements, text, comments, and unknowns.
+ Elements also contain an arbitrary number of attributes.
+*/
+class TiXmlElement : public TiXmlNode
+{
+public:
+ /// Construct an element.
+ TiXmlElement (const char * in_value);
+
+ #ifdef TIXML_USE_STL
+ /// std::string constructor.
+ TiXmlElement( const std::string& _value );
+ #endif
+
+ TiXmlElement( const TiXmlElement& );
+
+ void operator=( const TiXmlElement& base );
+
+ virtual ~TiXmlElement();
+
+ /** Given an attribute name, Attribute() returns the value
+ for the attribute of that name, or null if none exists.
+ */
+ const char* Attribute( const char* name ) const;
+
+ /** Given an attribute name, Attribute() returns the value
+ for the attribute of that name, or null if none exists.
+ If the attribute exists and can be converted to an integer,
+ the integer value will be put in the return 'i', if 'i'
+ is non-null.
+ */
+ const char* Attribute( const char* name, int* i ) const;
+
+ /** Given an attribute name, Attribute() returns the value
+ for the attribute of that name, or null if none exists.
+ If the attribute exists and can be converted to an double,
+ the double value will be put in the return 'd', if 'd'
+ is non-null.
+ */
+ const char* Attribute( const char* name, double* d ) const;
+
+ /** QueryIntAttribute examines the attribute - it is an alternative to the
+ Attribute() method with richer error checking.
+ If the attribute is an integer, it is stored in 'value' and
+ the call returns TIXML_SUCCESS. If it is not
+ an integer, it returns TIXML_WRONG_TYPE. If the attribute
+ does not exist, then TIXML_NO_ATTRIBUTE is returned.
+ */
+ int QueryIntAttribute( const char* name, int* _value ) const;
+ /// QueryDoubleAttribute examines the attribute - see QueryIntAttribute().
+ int QueryDoubleAttribute( const char* name, double* _value ) const;
+ /// QueryFloatAttribute examines the attribute - see QueryIntAttribute().
+ int QueryFloatAttribute( const char* name, float* _value ) const {
+ double d;
+ int result = QueryDoubleAttribute( name, &d );
+ if ( result == TIXML_SUCCESS ) {
+ *_value = (float)d;
+ }
+ return result;
+ }
+
+ #ifdef TIXML_USE_STL
+ /** Template form of the attribute query which will try to read the
+ attribute into the specified type. Very easy, very powerful, but
+ be careful to make sure to call this with the correct type.
+
+ NOTE: This method doesn't work correctly for 'string' types.
+
+ @return TIXML_SUCCESS, TIXML_WRONG_TYPE, or TIXML_NO_ATTRIBUTE
+ */
+ template< typename T > int QueryValueAttribute( const std::string& name, T* outValue ) const
+ {
+ const TiXmlAttribute* node = attributeSet.Find( name );
+ if ( !node )
+ return TIXML_NO_ATTRIBUTE;
+
+ std::stringstream sstream( node->ValueStr() );
+ sstream >> *outValue;
+ if ( !sstream.fail() )
+ return TIXML_SUCCESS;
+ return TIXML_WRONG_TYPE;
+ }
+ /*
+ This is - in theory - a bug fix for "QueryValueAtribute returns truncated std::string"
+ but template specialization is hard to get working cross-compiler. Leaving the bug for now.
+
+ // The above will fail for std::string because the space character is used as a seperator.
+ // Specialize for strings. Bug [ 1695429 ] QueryValueAtribute returns truncated std::string
+ template<> int QueryValueAttribute( const std::string& name, std::string* outValue ) const
+ {
+ const TiXmlAttribute* node = attributeSet.Find( name );
+ if ( !node )
+ return TIXML_NO_ATTRIBUTE;
+ *outValue = node->ValueStr();
+ return TIXML_SUCCESS;
+ }
+ */
+ #endif
+
+ /** Sets an attribute of name to a given value. The attribute
+ will be created if it does not exist, or changed if it does.
+ */
+ void SetAttribute( const char* name, const char * _value );
+
+ #ifdef TIXML_USE_STL
+ const std::string* Attribute( const std::string& name ) const;
+ const std::string* Attribute( const std::string& name, int* i ) const;
+ const std::string* Attribute( const std::string& name, double* d ) const;
+ int QueryIntAttribute( const std::string& name, int* _value ) const;
+ int QueryDoubleAttribute( const std::string& name, double* _value ) const;
+
+ /// STL std::string form.
+ void SetAttribute( const std::string& name, const std::string& _value );
+ ///< STL std::string form.
+ void SetAttribute( const std::string& name, int _value );
+ #endif
+
+ /** Sets an attribute of name to a given value. The attribute
+ will be created if it does not exist, or changed if it does.
+ */
+ void SetAttribute( const char * name, int value );
+
+ /** Sets an attribute of name to a given value. The attribute
+ will be created if it does not exist, or changed if it does.
+ */
+ void SetDoubleAttribute( const char * name, double value );
+
+ /** Deletes an attribute with the given name.
+ */
+ void RemoveAttribute( const char * name );
+ #ifdef TIXML_USE_STL
+ void RemoveAttribute( const std::string& name ) { RemoveAttribute (name.c_str ()); } ///< STL std::string form.
+ #endif
+
+ const TiXmlAttribute* FirstAttribute() const { return attributeSet.First(); } ///< Access the first attribute in this element.
+ TiXmlAttribute* FirstAttribute() { return attributeSet.First(); }
+ const TiXmlAttribute* LastAttribute() const { return attributeSet.Last(); } ///< Access the last attribute in this element.
+ TiXmlAttribute* LastAttribute() { return attributeSet.Last(); }
+
+ /** Convenience function for easy access to the text inside an element. Although easy
+ and concise, GetText() is limited compared to getting the TiXmlText child
+ and accessing it directly.
+
+ If the first child of 'this' is a TiXmlText, the GetText()
+ returns the character string of the Text node, else null is returned.
+
+ This is a convenient method for getting the text of simple contained text:
+ @verbatim
+ <foo>This is text</foo>
+ const char* str = fooElement->GetText();
+ @endverbatim
+
+ 'str' will be a pointer to "This is text".
+
+ Note that this function can be misleading. If the element foo was created from
+ this XML:
+ @verbatim
+ <foo><b>This is text</b></foo>
+ @endverbatim
+
+ then the value of str would be null. The first child node isn't a text node, it is
+ another element. From this XML:
+ @verbatim
+ <foo>This is <b>text</b></foo>
+ @endverbatim
+ GetText() will return "This is ".
+
+ WARNING: GetText() accesses a child node - don't become confused with the
+ similarly named TiXmlHandle::Text() and TiXmlNode::ToText() which are
+ safe type casts on the referenced node.
+ */
+ const char* GetText() const;
+
+ /// Creates a new Element and returns it - the returned element is a copy.
+ virtual TiXmlNode* Clone() const;
+ // Print the Element to a FILE stream.
+ virtual void Print( FILE* cfile, int depth ) const;
+
+ /* Attribtue parsing starts: next char past '<'
+ returns: next char past '>'
+ */
+ virtual const char* Parse( const char* p, TiXmlParsingData* data, TiXmlEncoding encoding );
+
+ virtual const TiXmlElement* ToElement() const { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+ virtual TiXmlElement* ToElement() { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+
+ /** Walk the XML tree visiting this node and all of its children.
+ */
+ virtual bool Accept( TiXmlVisitor* visitor ) const;
+
+protected:
+
+ void CopyTo( TiXmlElement* target ) const;
+ void ClearThis(); // like clear, but initializes 'this' object as well
+
+ // Used to be public [internal use]
+ #ifdef TIXML_USE_STL
+ virtual void StreamIn( std::istream * in, TIXML_STRING * tag );
+ #endif
+ /* [internal use]
+ Reads the "value" of the element -- another element, or text.
+ This should terminate with the current end tag.
+ */
+ const char* ReadValue( const char* in, TiXmlParsingData* prevData, TiXmlEncoding encoding );
+
+private:
+
+ TiXmlAttributeSet attributeSet;
+};
+
+
+/** An XML comment.
+*/
+class TiXmlComment : public TiXmlNode
+{
+public:
+ /// Constructs an empty comment.
+ TiXmlComment() : TiXmlNode( TiXmlNode::COMMENT ) {}
+ /// Construct a comment from text.
+ TiXmlComment( const char* _value ) : TiXmlNode( TiXmlNode::COMMENT ) {
+ SetValue( _value );
+ }
+ TiXmlComment( const TiXmlComment& );
+ void operator=( const TiXmlComment& base );
+
+ virtual ~TiXmlComment() {}
+
+ /// Returns a copy of this Comment.
+ virtual TiXmlNode* Clone() const;
+ // Write this Comment to a FILE stream.
+ virtual void Print( FILE* cfile, int depth ) const;
+
+ /* Attribtue parsing starts: at the ! of the !--
+ returns: next char past '>'
+ */
+ virtual const char* Parse( const char* p, TiXmlParsingData* data, TiXmlEncoding encoding );
+
+ virtual const TiXmlComment* ToComment() const { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+ virtual TiXmlComment* ToComment() { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+
+ /** Walk the XML tree visiting this node and all of its children.
+ */
+ virtual bool Accept( TiXmlVisitor* visitor ) const;
+
+protected:
+ void CopyTo( TiXmlComment* target ) const;
+
+ // used to be public
+ #ifdef TIXML_USE_STL
+ virtual void StreamIn( std::istream * in, TIXML_STRING * tag );
+ #endif
+// virtual void StreamOut( TIXML_OSTREAM * out ) const;
+
+private:
+
+};
+
+
+/** XML text. A text node can have 2 ways to output the next. "normal" output
+ and CDATA. It will default to the mode it was parsed from the XML file and
+ you generally want to leave it alone, but you can change the output mode with
+ SetCDATA() and query it with CDATA().
+*/
+class TiXmlText : public TiXmlNode
+{
+ friend class TiXmlElement;
+public:
+ /** Constructor for text element. By default, it is treated as
+ normal, encoded text. If you want it be output as a CDATA text
+ element, set the parameter _cdata to 'true'
+ */
+ TiXmlText (const char * initValue ) : TiXmlNode (TiXmlNode::TEXT)
+ {
+ SetValue( initValue );
+ cdata = false;
+ }
+ virtual ~TiXmlText() {}
+
+ #ifdef TIXML_USE_STL
+ /// Constructor.
+ TiXmlText( const std::string& initValue ) : TiXmlNode (TiXmlNode::TEXT)
+ {
+ SetValue( initValue );
+ cdata = false;
+ }
+ #endif
+
+ TiXmlText( const TiXmlText& copy ) : TiXmlNode( TiXmlNode::TEXT ) { copy.CopyTo( this ); }
+ void operator=( const TiXmlText& base ) { base.CopyTo( this ); }
+
+ // Write this text object to a FILE stream.
+ virtual void Print( FILE* cfile, int depth ) const;
+
+ /// Queries whether this represents text using a CDATA section.
+ bool CDATA() const { return cdata; }
+ /// Turns on or off a CDATA representation of text.
+ void SetCDATA( bool _cdata ) { cdata = _cdata; }
+
+ virtual const char* Parse( const char* p, TiXmlParsingData* data, TiXmlEncoding encoding );
+
+ virtual const TiXmlText* ToText() const { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+ virtual TiXmlText* ToText() { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+
+ /** Walk the XML tree visiting this node and all of its children.
+ */
+ virtual bool Accept( TiXmlVisitor* content ) const;
+
+protected :
+ /// [internal use] Creates a new Element and returns it.
+ virtual TiXmlNode* Clone() const;
+ void CopyTo( TiXmlText* target ) const;
+
+ bool Blank() const; // returns true if all white space and new lines
+ // [internal use]
+ #ifdef TIXML_USE_STL
+ virtual void StreamIn( std::istream * in, TIXML_STRING * tag );
+ #endif
+
+private:
+ bool cdata; // true if this should be input and output as a CDATA style text element
+};
+
+
+/** In correct XML the declaration is the first entry in the file.
+ @verbatim
+ <?xml version="1.0" standalone="yes"?>
+ @endverbatim
+
+ TinyXml will happily read or write files without a declaration,
+ however. There are 3 possible attributes to the declaration:
+ version, encoding, and standalone.
+
+ Note: In this version of the code, the attributes are
+ handled as special cases, not generic attributes, simply
+ because there can only be at most 3 and they are always the same.
+*/
+class TiXmlDeclaration : public TiXmlNode
+{
+public:
+ /// Construct an empty declaration.
+ TiXmlDeclaration() : TiXmlNode( TiXmlNode::DECLARATION ) {}
+
+#ifdef TIXML_USE_STL
+ /// Constructor.
+ TiXmlDeclaration( const std::string& _version,
+ const std::string& _encoding,
+ const std::string& _standalone );
+#endif
+
+ /// Construct.
+ TiXmlDeclaration( const char* _version,
+ const char* _encoding,
+ const char* _standalone );
+
+ TiXmlDeclaration( const TiXmlDeclaration& copy );
+ void operator=( const TiXmlDeclaration& copy );
+
+ virtual ~TiXmlDeclaration() {}
+
+ /// Version. Will return an empty string if none was found.
+ const char *Version() const { return version.c_str (); }
+ /// Encoding. Will return an empty string if none was found.
+ const char *Encoding() const { return encoding.c_str (); }
+ /// Is this a standalone document?
+ const char *Standalone() const { return standalone.c_str (); }
+
+ /// Creates a copy of this Declaration and returns it.
+ virtual TiXmlNode* Clone() const;
+ // Print this declaration to a FILE stream.
+ virtual void Print( FILE* cfile, int depth, TIXML_STRING* str ) const;
+ virtual void Print( FILE* cfile, int depth ) const {
+ Print( cfile, depth, 0 );
+ }
+
+ virtual const char* Parse( const char* p, TiXmlParsingData* data, TiXmlEncoding encoding );
+
+ virtual const TiXmlDeclaration* ToDeclaration() const { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+ virtual TiXmlDeclaration* ToDeclaration() { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+
+ /** Walk the XML tree visiting this node and all of its children.
+ */
+ virtual bool Accept( TiXmlVisitor* visitor ) const;
+
+protected:
+ void CopyTo( TiXmlDeclaration* target ) const;
+ // used to be public
+ #ifdef TIXML_USE_STL
+ virtual void StreamIn( std::istream * in, TIXML_STRING * tag );
+ #endif
+
+private:
+
+ TIXML_STRING version;
+ TIXML_STRING encoding;
+ TIXML_STRING standalone;
+};
+
+
+/** Any tag that tinyXml doesn't recognize is saved as an
+ unknown. It is a tag of text, but should not be modified.
+ It will be written back to the XML, unchanged, when the file
+ is saved.
+
+ DTD tags get thrown into TiXmlUnknowns.
+*/
+class TiXmlUnknown : public TiXmlNode
+{
+public:
+ TiXmlUnknown() : TiXmlNode( TiXmlNode::UNKNOWN ) {}
+ virtual ~TiXmlUnknown() {}
+
+ TiXmlUnknown( const TiXmlUnknown& copy ) : TiXmlNode( TiXmlNode::UNKNOWN ) { copy.CopyTo( this ); }
+ void operator=( const TiXmlUnknown& copy ) { copy.CopyTo( this ); }
+
+ /// Creates a copy of this Unknown and returns it.
+ virtual TiXmlNode* Clone() const;
+ // Print this Unknown to a FILE stream.
+ virtual void Print( FILE* cfile, int depth ) const;
+
+ virtual const char* Parse( const char* p, TiXmlParsingData* data, TiXmlEncoding encoding );
+
+ virtual const TiXmlUnknown* ToUnknown() const { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+ virtual TiXmlUnknown* ToUnknown() { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+
+ /** Walk the XML tree visiting this node and all of its children.
+ */
+ virtual bool Accept( TiXmlVisitor* content ) const;
+
+protected:
+ void CopyTo( TiXmlUnknown* target ) const;
+
+ #ifdef TIXML_USE_STL
+ virtual void StreamIn( std::istream * in, TIXML_STRING * tag );
+ #endif
+
+private:
+
+};
+
+
+/** Always the top level node. A document binds together all the
+ XML pieces. It can be saved, loaded, and printed to the screen.
+ The 'value' of a document node is the xml file name.
+*/
+class TiXmlDocument : public TiXmlNode
+{
+public:
+ /// Create an empty document, that has no name.
+ TiXmlDocument();
+ /// Create a document with a name. The name of the document is also the filename of the xml.
+ TiXmlDocument( const char * documentName );
+
+ #ifdef TIXML_USE_STL
+ /// Constructor.
+ TiXmlDocument( const std::string& documentName );
+ #endif
+
+ TiXmlDocument( const TiXmlDocument& copy );
+ void operator=( const TiXmlDocument& copy );
+
+ virtual ~TiXmlDocument() {}
+
+ /** Load a file using the current document value.
+ Returns true if successful. Will delete any existing
+ document data before loading.
+ */
+ bool LoadFile( TiXmlEncoding encoding = TIXML_DEFAULT_ENCODING );
+ /// Save a file using the current document value. Returns true if successful.
+ bool SaveFile() const;
+ /// Load a file using the given filename. Returns true if successful.
+ bool LoadFile( const char * filename, TiXmlEncoding encoding = TIXML_DEFAULT_ENCODING );
+ /// Save a file using the given filename. Returns true if successful.
+ bool SaveFile( const char * filename ) const;
+ /** Load a file using the given FILE*. Returns true if successful. Note that this method
+ doesn't stream - the entire object pointed at by the FILE*
+ will be interpreted as an XML file. TinyXML doesn't stream in XML from the current
+ file location. Streaming may be added in the future.
+ */
+ bool LoadFile( FILE*, TiXmlEncoding encoding = TIXML_DEFAULT_ENCODING );
+ /// Save a file using the given FILE*. Returns true if successful.
+ bool SaveFile( FILE* ) const;
+
+ #ifdef TIXML_USE_STL
+ bool LoadFile( const std::string& filename, TiXmlEncoding encoding = TIXML_DEFAULT_ENCODING ) ///< STL std::string version.
+ {
+// StringToBuffer f( filename );
+// return ( f.buffer && LoadFile( f.buffer, encoding ));
+ return LoadFile( filename.c_str(), encoding );
+ }
+ bool SaveFile( const std::string& filename ) const ///< STL std::string version.
+ {
+// StringToBuffer f( filename );
+// return ( f.buffer && SaveFile( f.buffer ));
+ return SaveFile( filename.c_str() );
+ }
+ #endif
+
+ /** Parse the given null terminated block of xml data. Passing in an encoding to this
+ method (either TIXML_ENCODING_LEGACY or TIXML_ENCODING_UTF8 will force TinyXml
+ to use that encoding, regardless of what TinyXml might otherwise try to detect.
+ */
+ virtual const char* Parse( const char* p, TiXmlParsingData* data = 0, TiXmlEncoding encoding = TIXML_DEFAULT_ENCODING );
+
+ /** Get the root element -- the only top level element -- of the document.
+ In well formed XML, there should only be one. TinyXml is tolerant of
+ multiple elements at the document level.
+ */
+ const TiXmlElement* RootElement() const { return FirstChildElement(); }
+ TiXmlElement* RootElement() { return FirstChildElement(); }
+
+ /** If an error occurs, Error will be set to true. Also,
+ - The ErrorId() will contain the integer identifier of the error (not generally useful)
+ - The ErrorDesc() method will return the name of the error. (very useful)
+ - The ErrorRow() and ErrorCol() will return the location of the error (if known)
+ */
+ bool Error() const { return error; }
+
+ /// Contains a textual (english) description of the error if one occurs.
+ const char * ErrorDesc() const { return errorDesc.c_str (); }
+
+ /** Generally, you probably want the error string ( ErrorDesc() ). But if you
+ prefer the ErrorId, this function will fetch it.
+ */
+ int ErrorId() const { return errorId; }
+
+ /** Returns the location (if known) of the error. The first column is column 1,
+ and the first row is row 1. A value of 0 means the row and column wasn't applicable
+ (memory errors, for example, have no row/column) or the parser lost the error. (An
+ error in the error reporting, in that case.)
+
+ @sa SetTabSize, Row, Column
+ */
+ int ErrorRow() const { return errorLocation.row+1; }
+ int ErrorCol() const { return errorLocation.col+1; } ///< The column where the error occured. See ErrorRow()
+
+ /** SetTabSize() allows the error reporting functions (ErrorRow() and ErrorCol())
+ to report the correct values for row and column. It does not change the output
+ or input in any way.
+
+ By calling this method, with a tab size
+ greater than 0, the row and column of each node and attribute is stored
+ when the file is loaded. Very useful for tracking the DOM back in to
+ the source file.
+
+ The tab size is required for calculating the location of nodes. If not
+ set, the default of 4 is used. The tabsize is set per document. Setting
+ the tabsize to 0 disables row/column tracking.
+
+ Note that row and column tracking is not supported when using operator>>.
+
+ The tab size needs to be enabled before the parse or load. Correct usage:
+ @verbatim
+ TiXmlDocument doc;
+ doc.SetTabSize( 8 );
+ doc.Load( "myfile.xml" );
+ @endverbatim
+
+ @sa Row, Column
+ */
+ void SetTabSize( int _tabsize ) { tabsize = _tabsize; }
+
+ int TabSize() const { return tabsize; }
+
+ /** If you have handled the error, it can be reset with this call. The error
+ state is automatically cleared if you Parse a new XML block.
+ */
+ void ClearError() { error = false;
+ errorId = 0;
+ errorDesc = "";
+ errorLocation.row = errorLocation.col = 0;
+ //errorLocation.last = 0;
+ }
+
+ /** Write the document to standard out using formatted printing ("pretty print"). */
+ void Print() const { Print( stdout, 0 ); }
+
+ /* Write the document to a string using formatted printing ("pretty print"). This
+ will allocate a character array (new char[]) and return it as a pointer. The
+ calling code pust call delete[] on the return char* to avoid a memory leak.
+ */
+ //char* PrintToMemory() const;
+
+ /// Print this Document to a FILE stream.
+ virtual void Print( FILE* cfile, int depth = 0 ) const;
+ // [internal use]
+ void SetError( int err, const char* errorLocation, TiXmlParsingData* prevData, TiXmlEncoding encoding );
+
+ virtual const TiXmlDocument* ToDocument() const { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+ virtual TiXmlDocument* ToDocument() { return this; } ///< Cast to a more defined type. Will return null not of the requested type.
+
+ /** Walk the XML tree visiting this node and all of its children.
+ */
+ virtual bool Accept( TiXmlVisitor* content ) const;
+
+protected :
+ // [internal use]
+ virtual TiXmlNode* Clone() const;
+ #ifdef TIXML_USE_STL
+ virtual void StreamIn( std::istream * in, TIXML_STRING * tag );
+ #endif
+
+private:
+ void CopyTo( TiXmlDocument* target ) const;
+
+ bool error;
+ int errorId;
+ TIXML_STRING errorDesc;
+ int tabsize;
+ TiXmlCursor errorLocation;
+ bool useMicrosoftBOM; // the UTF-8 BOM were found when read. Note this, and try to write.
+};
+
+
+/**
+ A TiXmlHandle is a class that wraps a node pointer with null checks; this is
+ an incredibly useful thing. Note that TiXmlHandle is not part of the TinyXml
+ DOM structure. It is a separate utility class.
+
+ Take an example:
+ @verbatim
+ <Document>
+ <Element attributeA = "valueA">
+ <Child attributeB = "value1" />
+ <Child attributeB = "value2" />
+ </Element>
+ <Document>
+ @endverbatim
+
+ Assuming you want the value of "attributeB" in the 2nd "Child" element, it's very
+ easy to write a *lot* of code that looks like:
+
+ @verbatim
+ TiXmlElement* root = document.FirstChildElement( "Document" );
+ if ( root )
+ {
+ TiXmlElement* element = root->FirstChildElement( "Element" );
+ if ( element )
+ {
+ TiXmlElement* child = element->FirstChildElement( "Child" );
+ if ( child )
+ {
+ TiXmlElement* child2 = child->NextSiblingElement( "Child" );
+ if ( child2 )
+ {
+ // Finally do something useful.
+ @endverbatim
+
+ And that doesn't even cover "else" cases. TiXmlHandle addresses the verbosity
+ of such code. A TiXmlHandle checks for null pointers so it is perfectly safe
+ and correct to use:
+
+ @verbatim
+ TiXmlHandle docHandle( &document );
+ TiXmlElement* child2 = docHandle.FirstChild( "Document" ).FirstChild( "Element" ).Child( "Child", 1 ).ToElement();
+ if ( child2 )
+ {
+ // do something useful
+ @endverbatim
+
+ Which is MUCH more concise and useful.
+
+ It is also safe to copy handles - internally they are nothing more than node pointers.
+ @verbatim
+ TiXmlHandle handleCopy = handle;
+ @endverbatim
+
+ What they should not be used for is iteration:
+
+ @verbatim
+ int i=0;
+ while ( true )
+ {
+ TiXmlElement* child = docHandle.FirstChild( "Document" ).FirstChild( "Element" ).Child( "Child", i ).ToElement();
+ if ( !child )
+ break;
+ // do something
+ ++i;
+ }
+ @endverbatim
+
+ It seems reasonable, but it is in fact two embedded while loops. The Child method is
+ a linear walk to find the element, so this code would iterate much more than it needs
+ to. Instead, prefer:
+
+ @verbatim
+ TiXmlElement* child = docHandle.FirstChild( "Document" ).FirstChild( "Element" ).FirstChild( "Child" ).ToElement();
+
+ for( child; child; child=child->NextSiblingElement() )
+ {
+ // do something
+ }
+ @endverbatim
+*/
+class TiXmlHandle
+{
+public:
+ /// Create a handle from any node (at any depth of the tree.) This can be a null pointer.
+ TiXmlHandle( TiXmlNode* _node ) { this->node = _node; }
+ /// Copy constructor
+ TiXmlHandle( const TiXmlHandle& ref ) { this->node = ref.node; }
+ TiXmlHandle operator=( const TiXmlHandle& ref ) { this->node = ref.node; return *this; }
+
+ /// Return a handle to the first child node.
+ TiXmlHandle FirstChild() const;
+ /// Return a handle to the first child node with the given name.
+ TiXmlHandle FirstChild( const char * value ) const;
+ /// Return a handle to the first child element.
+ TiXmlHandle FirstChildElement() const;
+ /// Return a handle to the first child element with the given name.
+ TiXmlHandle FirstChildElement( const char * value ) const;
+
+ /** Return a handle to the "index" child with the given name.
+ The first child is 0, the second 1, etc.
+ */
+ TiXmlHandle Child( const char* value, int index ) const;
+ /** Return a handle to the "index" child.
+ The first child is 0, the second 1, etc.
+ */
+ TiXmlHandle Child( int index ) const;
+ /** Return a handle to the "index" child element with the given name.
+ The first child element is 0, the second 1, etc. Note that only TiXmlElements
+ are indexed: other types are not counted.
+ */
+ TiXmlHandle ChildElement( const char* value, int index ) const;
+ /** Return a handle to the "index" child element.
+ The first child element is 0, the second 1, etc. Note that only TiXmlElements
+ are indexed: other types are not counted.
+ */
+ TiXmlHandle ChildElement( int index ) const;
+
+ #ifdef TIXML_USE_STL
+ TiXmlHandle FirstChild( const std::string& _value ) const { return FirstChild( _value.c_str() ); }
+ TiXmlHandle FirstChildElement( const std::string& _value ) const { return FirstChildElement( _value.c_str() ); }
+
+ TiXmlHandle Child( const std::string& _value, int index ) const { return Child( _value.c_str(), index ); }
+ TiXmlHandle ChildElement( const std::string& _value, int index ) const { return ChildElement( _value.c_str(), index ); }
+ #endif
+
+ /** Return the handle as a TiXmlNode. This may return null.
+ */
+ TiXmlNode* ToNode() const { return node; }
+ /** Return the handle as a TiXmlElement. This may return null.
+ */
+ TiXmlElement* ToElement() const { return ( ( node && node->ToElement() ) ? node->ToElement() : 0 ); }
+ /** Return the handle as a TiXmlText. This may return null.
+ */
+ TiXmlText* ToText() const { return ( ( node && node->ToText() ) ? node->ToText() : 0 ); }
+ /** Return the handle as a TiXmlUnknown. This may return null.
+ */
+ TiXmlUnknown* ToUnknown() const { return ( ( node && node->ToUnknown() ) ? node->ToUnknown() : 0 ); }
+
+ /** @deprecated use ToNode.
+ Return the handle as a TiXmlNode. This may return null.
+ */
+ TiXmlNode* Node() const { return ToNode(); }
+ /** @deprecated use ToElement.
+ Return the handle as a TiXmlElement. This may return null.
+ */
+ TiXmlElement* Element() const { return ToElement(); }
+ /** @deprecated use ToText()
+ Return the handle as a TiXmlText. This may return null.
+ */
+ TiXmlText* Text() const { return ToText(); }
+ /** @deprecated use ToUnknown()
+ Return the handle as a TiXmlUnknown. This may return null.
+ */
+ TiXmlUnknown* Unknown() const { return ToUnknown(); }
+
+private:
+ TiXmlNode* node;
+};
+
+
+/** Print to memory functionality. The TiXmlPrinter is useful when you need to:
+
+ -# Print to memory (especially in non-STL mode)
+ -# Control formatting (line endings, etc.)
+
+ When constructed, the TiXmlPrinter is in its default "pretty printing" mode.
+ Before calling Accept() you can call methods to control the printing
+ of the XML document. After TiXmlNode::Accept() is called, the printed document can
+ be accessed via the CStr(), Str(), and Size() methods.
+
+ TiXmlPrinter uses the Visitor API.
+ @verbatim
+ TiXmlPrinter printer;
+ printer.SetIndent( "\t" );
+
+ doc.Accept( &printer );
+ fprintf( stdout, "%s", printer.CStr() );
+ @endverbatim
+*/
+class TiXmlPrinter : public TiXmlVisitor
+{
+public:
+ TiXmlPrinter() : depth( 0 ), simpleTextPrint( false ),
+ buffer(), indent( " " ), lineBreak( "\n" ) {}
+
+ virtual bool VisitEnter( const TiXmlDocument& doc );
+ virtual bool VisitExit( const TiXmlDocument& doc );
+
+ virtual bool VisitEnter( const TiXmlElement& element, const TiXmlAttribute* firstAttribute );
+ virtual bool VisitExit( const TiXmlElement& element );
+
+ virtual bool Visit( const TiXmlDeclaration& declaration );
+ virtual bool Visit( const TiXmlText& text );
+ virtual bool Visit( const TiXmlComment& comment );
+ virtual bool Visit( const TiXmlUnknown& unknown );
+
+ /** Set the indent characters for printing. By default 4 spaces
+ but tab (\t) is also useful, or null/empty string for no indentation.
+ */
+ void SetIndent( const char* _indent ) { indent = _indent ? _indent : "" ; }
+ /// Query the indention string.
+ const char* Indent() { return indent.c_str(); }
+ /** Set the line breaking string. By default set to newline (\n).
+ Some operating systems prefer other characters, or can be
+ set to the null/empty string for no indenation.
+ */
+ void SetLineBreak( const char* _lineBreak ) { lineBreak = _lineBreak ? _lineBreak : ""; }
+ /// Query the current line breaking string.
+ const char* LineBreak() { return lineBreak.c_str(); }
+
+ /** Switch over to "stream printing" which is the most dense formatting without
+ linebreaks. Common when the XML is needed for network transmission.
+ */
+ void SetStreamPrinting() { indent = "";
+ lineBreak = "";
+ }
+ /// Return the result.
+ const char* CStr() { return buffer.c_str(); }
+ /// Return the length of the result string.
+ size_t Size() { return buffer.size(); }
+
+ #ifdef TIXML_USE_STL
+ /// Return the result.
+ const std::string& Str() { return buffer; }
+ #endif
+
+private:
+ void DoIndent() {
+ for( int i=0; i<depth; ++i )
+ buffer += indent;
+ }
+ void DoLineBreak() {
+ buffer += lineBreak;
+ }
+
+ int depth;
+ bool simpleTextPrint;
+ TIXML_STRING buffer;
+ TIXML_STRING indent;
+ TIXML_STRING lineBreak;
+};
+
+
+#ifdef _MSC_VER
+#pragma warning( pop )
+#endif
+
+#endif
+
Modified: projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/zigbee/Makefile.cross
==============================================================================
--- projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/zigbee/Makefile.cross (original)
+++ projects/zb4osgi/sandbox/telecomItalia/initialContribution/GAL/zigbee/Makefile.cross Wed Jan 16 11:47:54 2013
@@ -1,6 +1,6 @@
include ../Makefile.rules
-#export BUILD_EZSP=Y
+export BUILD_EZSP=Y
export BUILD_FREESCALE=y
# to chose to be compatible with ZigBee 2006, otherwise Zigbee 2004
More information about the Commit
mailing list