Bug #165

Relative Humidity Measurement Cluster not shown

Added by Han Alink almost 6 years ago. Updated over 5 years ago.

Status:In Progress Start date:10/29/2012
Priority:Normal Due date:
Assignee:Stefano Lenzi % Done:

0%

Category:zigbee.tester Spent time: -
Target version:org.aaloa.zb4osgi.zigbee.tester-0.4.0
Has a patch:No Has license agreement signed:No

Description

The RelativeHumidityMeasurement cluster is not shown in the tester interface

Z711.jpg (82.3 kB) Han Alink, 02/28/2013 10:50 am


Related issues

related to Improvement #189: HADriver should allows a way for supporting extra cluster New 02/27/2013

History

#1 Updated by Stefano Lenzi over 5 years ago

  • Category set to zigbee.tester
  • Status changed from New to In Progress
  • Assignee set to Stefano Lenzi
  • Target version set to org.aaloa.zb4osgi.zigbee.tester-0.4.0

#2 Updated by Han Alink over 5 years ago

The NetVox Z711 (with DeviceID = 0x0302), is not only equipped with a temperature sensor (as is mandatory for this deviceID), but also with a humidity sensor.
As such the Z711 is not a standard HomeAutomation Profile device and is not supported by the standard ZB4O software.
To be able to detect and show both clusters, a new device has to be defined in ZB4O.
As this will be the case for more zigbee devices, and is more or less a general requirement, this item should be closed.
Stefano, if you agree, do so.

#3 Updated by Stefano Lenzi over 5 years ago

  • Status changed from In Progress to Feedback

Yes it is more general requirement, which has in inpact on the ZB4O architecture. Would you mind to send me a screenshot of the zigbee.tester showing the InputCluster of the discovered Z711 device?

#4 Updated by Han Alink over 5 years ago

Attached is a screenshot of the temperature device (Actually it is not the Z711 of NetVox, but the a NetVox OEM product: ZBHT-1 of SimpleHomeNet)

#5 Updated by Stefano Lenzi over 5 years ago

  • Status changed from Feedback to In Progress

Also available in: Atom PDF